Cobra Electronics PI2000 Controls and Indicators Operating Limits, Operating Limits Input Voltage

Page 10

Controls and Indicators

Operating Limits

 

 

Controls and Indicators

Operating Limits

ON/OFF Switch

Turns the control circuit in the inverter On and Off. It does not disconnect power from the inverter.

When the switch is in the Off position, the inverter draws no current from the battery. When it’s in the On position, but no power is being supplied to the load, the inverter draws less than 500 milliamperes from the battery. This is low current draw. It would take more than a week to discharge a 100 ampere- hour battery at this rate.

Don’t worry about excessive drain on the battery if you leave the inverter switched On for a few days. However, do switch it off if you are not planning be recharge the battery within a week or so.

Power Output

The inverter will deliver 2000 watts continuously. It can deliver 2400 watts for about 30 minutes.The inverter must cool for 15 minutes before it can resume operation at 2000 watts. Note:The wattage rating applies to resistive loads.

The inverter will operate most AC loads within its power rating. Some induction motors used in freez- ers, pumps, and other motor-operated equipment require very high surge currents to start.The invert- er may not be able to start some of these motors even though their rated current draw is within the inverter’s limits.The inverter will normally start sin- gle phase induction motors rated at 1/2 HP or less

Input Voltage

The inverter will operate from input voltage rang- ing from 10 volts to 15 volts. Optimum perfor- mance will occur when the voltage is between 12 volts and 14 volts. If the voltage drops below 10.5+/-0.3V volts, an audible low battery warning will sound. The inverter will shut down if the input voltage drops below 9.5V+/-0.3V volts. This protects the battery from being over-discharged. It will restart when the input voltage exceeds 10.5V+/-0.3V volts.

The inverter will also shut down if the input volt- age falls to 15.75V +/- 0.75V. This protects the inverter against excessive input voltage. Although the inverter has protection against over-voltage, it may still be damaged if the input voltage were to exceeds 16 volts.

Operating

Limits

Input Voltage

14

15

 

 

Image 10
Contents How Your HG PI2000 Power Inverter Works How Your Cobra Power Inverter WorksControls and Indicators Customer SupportHow to Use Your HG PI2000 Power Inverter ContentsIntroduction Cobra 2000W Output WaveformQuick Quick Checkout Testing/ConnectionTesting Connection CheckoutConnection Installation Installation Mounting/CablesInstallation MountingGround Wiring Cables Ground WiringGround Wiring DC Wiring DC WiringDC Wiring OperationControls and Indicators Operating Limits Controls and Indicators Operating LimitsOperating Limits Input Voltage Solution Troubleshooting Guide MaintenanceMaintenance MaintenancePower Consumption Specifications SpecificationsLimited Three Year Warranty Cobra Electronics CorporationIf You Think You Need Service 773

PI2000 specifications

Cobra Electronics has long been recognized for its innovative approach to communication and navigation solutions, and the PI2000 is a testament to this commitment. The Cobra PI2000 is a high-performance personal locator beacon designed for outdoor enthusiasts and adventurers who seek reliability and peace of mind during their excursions.

One of the standout features of the PI2000 is its advanced GPS technology. The device integrates satellite-based positioning, which allows users to pinpoint their exact location with remarkable accuracy. In emergency situations, this feature is invaluable, as it can significantly shorten response times for rescue operations. The PI2000 transmits critical GPS coordinates to search and rescue teams, ensuring that help can be dispatched without delay.

In addition to its GPS capabilities, the PI2000 is equipped with a powerful 406 MHz beacon, which is internationally recognized as the standard frequency for emergency beacons. This frequency allows the device to send distress signals to the nearest search and rescue authorities. Its 121.5 MHz homing signal aids rescuers in locating the device once the distress signal is received. This dual-frequency capability enhances the likelihood of a quick and efficient rescue in challenging terrain.

The build quality of the Cobra PI2000 is another key characteristic. Engineered to withstand harsh environmental conditions, it is both waterproof and rugged, making it suitable for various outdoor activities, from hiking and camping to boating and skiing. The device's ergonomic design ensures that it can be easily operated, even while wearing gloves, which is essential during emergencies.

Another significant aspect of the PI2000 is its battery life. It utilizes a robust lithium battery, designed to provide extended usage times, which is crucial during prolonged outdoor adventures where recharging may not be feasible. The device also features a low-battery indicator, alerting users when it's time to replace or recharge the battery, further enhancing safety.

User-friendly features such as a simple activation mechanism make the Cobra PI2000 accessible for individuals of all experience levels. A single push of a button can initiate a distress signal, which can especially be vital in high-stress situations.

Overall, the Cobra PI2000 represents a critical piece of equipment for anyone who spends time in remote or risky environments. With its combination of advanced GPS technology, reliable beacon transmission, rugged design, and user-centered features, it stands out as a must-have safety tool for adventurers seeking to explore the great outdoors.