Commercial Audio Series
5 Specifications
Minimum Guaranteed Power | 140MPA | |
|
| |
1 kHz with 0.5% THD |
| |
Minimum guaranteed power into 4 ohms or 25V/70V output | 40W | |
|
| |
Performance |
| |
|
| |
Number of input channels | 4 | |
|
| |
Number of power amplifiers | 1 | |
|
| |
Input Sensitivity (volts RMS) for full output at maximum gain |
| |
Balanced mic inputs | 3 mV | |
800 mV | ||
Balanced line inputs | ||
400 mV | ||
RCA connectors | ||
| ||
|
| |
Frequency Response (at 1 watt from | ± 1 dB | |
|
| |
Frequency Response (at line out, 50 Hz to 15 kHz) | ± 1 dB | |
|
| |
Power Bandwidth (at | 50 Hz to 20 kHz with < 0.5% THD | |
|
| |
Signal to Noise Ratio (ref. to rated power, master volume at minimum) | > 90 dB | |
|
| |
Total Harmonic Distortion (THD) at rated power at 1 kHz | < 0.5% | |
|
| |
DC Output Offset | < ± 5 mV | |
|
| |
Input Impedance (nominal) | Mic: 400 ohms, Line: 100 kilohms, | |
| RCA: 50 kilohms | |
|
| |
Crosstalk (all controls at “10”) | ||
|
| |
Line Output Level (nominal) | 1V into 10 kilohms | |
|
| |
Phantom Power | 15 VDC | |
|
| |
AC Line Voltages Available | 120V, 60 Hz. | |
| Line voltage tolerance +15%, | |
|
| |
Operating Temperature/Humidity | 0o C to 40o C at 95% relative humidity | |
| ||
|
| |
Storage Temperature | ||
Construction |
| |
|
| |
Cooling | Convection cooled | |
|
| |
Dimensions | Width without rack ears: 17.3 in. (43.8 cm) | |
| Width with rack ears: EIA Standard 19 in. W (EIA | |
| Height of front panel: 3.5 in. (8.9 cm) | |
| Height including feet: 4.1 in. (10.5 cm) | |
| Depth from front panel to back panel: 12.2 in. (31.0 cm) | |
| Depth from front of knobs to back of | |
| 13.9 in. (35.2 cm) | |
|
| |
Net Weight, Shipping Weight | 17 lb (7.7 kg), 22 lb (9.98 kg) | |
|
|
Operation Manual | page 15 |