Commercial Audio Series
6 Service
Crown
This unit has very sophisticated circuitry which should only be serviced by a fully trained technician. This is one reason why each unit bears the following label:
CAUTION: To prevent electric shock, do not remove covers. No user serviceable parts inside. Refer servicing to a qualified technician.
Complete the Crown Audio Factory Service Information form, in the back of this manual, when returning a Crown product to the factory or authorized service center. The form must be included with your product inside the box or in a packing slip envelope securely attached to the outside of the shipping carton. Do not send this form separately.
6.1 Worldwide Service
Service may be obtained from an authorized service cen- ter. (Contact your local Crown/Amcron representative or our office for a list of authorized service centers.) To obtain service, simply present the bill of sale as proof of purchase along with the defective unit to an authorized service center. They will handle the necessary paperwork and repair.
Remember to transport your unit in the original factory pack.
6.2 US and Canada Service
Service may be obtained in one of two ways: from an authorized service center or from the factory. You may choose either. It is important that you have your copy of the bill of sale as your proof of purchase.
6.2.1Service at a US or Canada Service Center
This method usually saves the most time and effort. Sim- ply present your bill of sale along with the defective unit to an authorized service center to obtain service. They will handle the necessary paperwork and repair. Remem-
ber to transport the unit in the original factory pack. A list of authorized service centers in your area can be obtained from Crown Factory Service, or online from http://www.crownaudio.com/support/servcent.htm.
6.2.2 Factory Service
Crown accepts no responsibility for
For more information, please contact us direct.
A Service Return Authorization (SRA) is required for product being sent to the factory for repair. An SRA can be completed online at www.crownaudio.com/support/ factserv.htm. If you do not have access to the web, please call Crown’s Customer Service at 574.294.8200 or 800.342.6939 extension 8205 in North America, Puerto Rico and the Virgin Islands only.
For warranty service, we will pay for ground shipping both ways in the United States. Contact Crown Customer Service to obtain prepaid shipping labels prior to send- ing the unit. Or, if you prefer, you may prepay the cost of shipping, and Crown will reimburse you. Send copies of the shipping receipts to Crown to receive reimbursement.
Your repaired unit will be returned via UPS ground. Please contact us if other arrangements are required.
6.2.3Factory Service Shipping Instruc- tions:
1.Service Return Authorization (SRA) is required for product being sent to the factory for service. Please complete the SRA by going to www.crownau- dio.com/support/factserv.htm. If you do not have access to our website, call 1.800.342.6939, exten- sion 8205 and we'll create the SRA for you.
2.See packing instructions that follow.
3.Ship product to:
CROWN AUDIO FACTORY SERVICE 1718 W MISHAWKA RD. ELKHART, IN 46517
4.Use a bold black marker and write the SRA number on three sides of the box.
5.Record the SRA number for future reference. The SRA number can be used to check the repair status.
6.2.4 Packing Instructions
Important: These instructions must be followed. If they are not followed, Crown Audio, Inc. assumes no respon- sibility for damaged goods and/or accessories that are sent with your unit.
1.Fill out and include the Crown Audio Factory Ser- vice Information sheet in the back of this manual.
2.Do not ship any accessories (manuals, cords, hard- ware, etc.) with your unit. These items are not needed to service your product. We will not be responsible for these items.
3.When shipping your Crown product, it is important that it has adequate protection. We recommend you use the original pack material when returning the product for repair (Figure 9.1). If you do not have the original box, please call Crown at 800.342.6939 or 574.294.8210 and order new pack material. (Do not ship your unit in a wood or metal cabinet.)
4.If you provide your own shipping pack, the mini- mum recommended requirements for materials are as follows:
a. 275 P.S.I. burst test,
b.Securely seal the package with an adequate car- ton sealing tape.
c.Do not use light boxes or “peanuts”. Damage caused by poor packaging will not be covered under warranty.
Enclose the completed Crown Audio Factory Service Information form (or securely attach it to the outside of carton) and
Cardboard support
Bag
Cardboard
support
Figure 6.1 Packing.
Put this assembly in carton.
6.2.5 Estimate Approval
Approval of estimate must be given within 90 days after being notified by Crown Audio Inc. Units still in the pos- session of Crown after 90 days of the estimate will become the property of Crown Audio Inc.
6.2.6 Payment of Non-Warranty Repairs
Payment on
If you have any questions, please contact Crown Factory Service.
Crown Factory Service
1718 W. Mishawaka Rd.,
Elkhart, Indiana 46517 U.S.A.
Telephone:
574.294.8200
800.342.6939 (North America,
Puerto Rico, and Virgin Islands only)
Facsimile:
574.294.8301 (Technical Support)
574.294.8124 (Factory Service)
Internet:
http://www.crownaudio.com
page 16 | Operation Manual |