Briggs & Stratton 030208 owner manual Using the Generator, Operating Generator, System Ground

Page 8

3500W Portable Generator

USING THE GENERATOR

System Ground

The generator has a system ground that connects the generator frame components to the ground terminals on the AC output receptacles.The system ground is connected to the AC neutral wire (the neutral is bonded to the generator frame).

Special Requirements

There may be Federal or State Occupational Safety and Health Administration (OSHA) regulations, local codes, or ordinances that apply to the intended use of the generator. Please consult a qualified electrician, electrical inspector, or the local agency having jurisdiction.

In some areas, generators are required to be registered with local utility companies.

If the generator is used at a construction site, there may be additional regulations which must be observed.

Connecting to a Building’s Electrical System

Connections for standby power to a building’s electrical system must be made by a qualified electrician.The connection must isolate the generator power from utility power, and must comply with all applicable laws and electrical codes.

DANGER

Generator produces powerful voltage.

Failure to isolate generator from power utility can result in death or injury to electric utility workers due to backfeed of electrical energy.

When using generator for backup power, notify utility company. Use approved transfer equipment to isolate generator from electric utility.

Use a ground fault circuit interrupter (GFCI) in any damp or highly conductive area, such as metal decking or steel work.

DO NOT touch bare wires or receptacles.

DO NOT use generator with electrical cords which are worn, frayed, bare or otherwise damaged.

DO NOT operate generator in the rain.

DO NOT handle generator or electrical cords while standing in water, while barefoot, or while hands or feet are wet.

DO NOT allow unqualified persons or children to operate or service generator.

OPERATING THE

GENERATOR

CAUTION

Exceeding generators wattage/amperage capacity can damage generator and/or electrical devices connected to it.

See “Don’t Overload Generator”.

Start generator and let engine stabilize before connecting electrical loads.

Connect electrical loads in OFF position, then turn ON for operation.

Turn electrical loads OFF and disconnect from generator before stopping generator.

DANGER

Running generator gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide will cause nausea, fainting or death.

Operate generator ONLY outdoors.

DO NOT operate generator inside any building or enclosure, including the generator compartment of a recreational vehicle (RV).

Starting the Engine

Disconnect all electrical loads from the generator. Use the following start instructions:

1.Make sure unit is on a level surface.

IMPORTANT: Failure to start and operate unit on a level surface will cause the unit not to start or shut down during operation.

2.Turn the fuel valve to the “On” position (Figure 3).The fuel valve handle should be vertical (pointing toward the ground) for fuel to flow.

Figure 3 — Fuel Valve

Fuel Valve is shown in the On position

3.Start engine according to instructions given in the engine owner’s manual.

8

Image 8
Contents 030208 3500W Equipment Description Table of ContentsSafety Rules When Adding or Draining Fuel When Starting EquipmentWhen Operating Equipment When Transporting or Repairing EquipmentWhen Adjusting or Making Repairs to Your Generator When Testing for Engine SparkKnow Your Generator Assembly Install Wheel KITCarton Contents Remove Generator From CartonWhen Adding Fuel Before Starting EngineAdd Engine Oil Add FuelUsing the Generator Connecting to a Building’s Electrical SystemOperating Generator System GroundConnecting Electrical Loads Receptacles120/240 Volt AC, 20 Amp, Locking Receptacle Stopping the EngineCold Weather Operation Volt AC, 20 Amp, Duplex ReceptaclesPower Management Dont Overload GeneratorCapacity ExampleSpecifications General Maintenance RecommendationsEngine Maintenance Generator MaintenanceEngine Storage Other Storage Tips StorageGenerator Storage Troubleshooting Problem Cause Correction3500W Portable Generator Schematic Wiring Diagram Exploded View Main Unit Parts Not Illustrated Exploded View Parts ListDescription Exploded View and Parts List Alternator StatorExploded View and Parts List Control Panel Exploded View and Parts List Wheel KIT PINLimited Warranty Tabla DE Contenidos Descripción DEL EquipoInstrucciones DE Seguridad AdvertenciaPeligro Cuando Añada Combustible O Vacíe EL DepósitoCuando Ponga EN Funcionamiento EL Equipo Cuando Opere EL EquipoCuando Pruebe LA Bujía DEL Motor PrecauciónCuando Ajuste O Haga Reparaciones a SU Generador Conozca SU Generador Tapa del Depósito del Aceite Llene el motor con aceiteTomacorriente Dobles de 120 Voltios AC, 20 Amp Tomacorriente con Dispositivo de Seguridad deMontaje Instale EL Juego DE RuedasPara Retirar El Generador De La Caja Contenido de la CajaAntes DE Darle Arranque AL Motor Agregar Aceite al MotorAgregue Combustible Cuando Añada CombustibleUSO DEL Generador Operando EL Generador PrecauciónTierra del Sistema Conexión al Sistema Eléctrico de un EdificioReceptáculos Precaución Conexion De Cargas ElectricasParado Del Motor 120/240 Voltios AC, 20 Amperios, Receptáculo de SeguridadOperación Durante UN Clima Frío Volt AC, 20 Amp, Receptáculos DoblesNo Sobrecargue Generador CapacidadControl de la Energía EjemploEspecificaciones Recomendaciones Generales DE MantenimientoMantenimiento del Motor Para Limpiar el GeneradorDiagnositicos DE Averías AlmacenamientoAlmacenando el Generador Almacenando el MotorGarantía Limitada

030208 specifications

The Briggs & Stratton 030208 is a popular and reliable model widely recognized for its efficiency, durability, and robust performance in various applications. This engine is primarily designed for portable generators, lawn mowers, pressure washers, and other outdoor power equipment, making it a versatile choice for both professional and homeowner use.

One of the standout features of the Briggs & Stratton 030208 is its 8.5-foot-pounds of torque, which translates into powerful performance for heavy-duty tasks. The engine operates on a 4-cycle system, ensuring lower emissions and reduced fuel consumption compared to 2-cycle engines. This not only makes it eco-friendly but also enhances its overall efficiency, allowing users to accomplish more with less fuel.

In terms of technology, the 030208 integrates advanced engineering elements designed for improved operability. The engine features a durable and reliable overhead valve (OHV) configuration, providing increased airflow and better cooling during operation. This design contributes to a longer engine life and enhanced performance in demanding conditions.

Another notable characteristic of the Briggs & Stratton 030208 is its ease of starting. The engine is equipped with a choke lever, ensuring a smooth and hassle-free start-up process, even in cold weather. Additionally, the maintenance-friendly design includes a removable air filter, allowing for straightforward cleaning and replacement, which saves users time and effort in upkeep.

The compact design of the 030208 makes it suitable for applications requiring limited space while still delivering substantial power. Weighing approximately 51 pounds, it is light enough to be portable, yet sturdy enough to withstand the rigors of continuous use.

Overall, the Briggs & Stratton 030208 engine represents a blend of innovation and practicality, characterized by its strong torque, efficient fuel consumption, and user-friendly maintenance features. This engine continues to be a favored choice among consumers looking for dependable outdoor power solutions, showcasing the brand's commitment to quality and performance in the engine manufacturing industry.