Baldor PC13R, BALDOR GENERATOR manual Driver + Driver

'art to remove

5.Front cover (1) Remove the element coverby unscrewing M6 X 12 screw. (See Fig. 10-6.)

(2)Remove the front cover byunscrewing three M5 X 8 screws. (See Fig. 10-6.)

Tool

~

(-)Driver

(+)Driver

1

		Element cover
		Fig. 10-6
6 . Fuel pipe	(1) Dischargefuel from thetank.			Use utmost care about
and plug	1. Shut the fuel striner.			fire hazard.
(Discon-	2. Remove the strainer cup.			Wipe off spiltfuel
nection)	3. Put a vessel to receive fuel under the
	strainer andopenthefuelcock		to	throughly.
	discharge fuel.(SeeFig. 10-7.)			Do not lose thefiller
	4. Attach the strainer cup to the strainer
	body			screen.
	(2) Disconnect fuel hose from the strainer.			Pliers
	Loosen thehoseclamp	on topof	the

strainer and pull out the fuel hose from the strainer. (See Fig. 10-8.)

I	I
Fig. 70-7	Fig. 10-8

- 34 -