Buffalo Tools GEN154 instruction manual Starting the Generator

Page 14

STARTING THE GENERATOR

STOP!

Before starting this generator, confirm that all the steps in the section titled, “Preparing the Generator for Use,” of this manual have been correctly completed. If unsure about how to perform any of these steps, call 1-888-287-6981, Monday - Friday, 8 AM - 4 PM Central Time for customer service.

Disconnect all electrical loads from this generator before attempting to start.

To start this generator:

1.Confirm that there are no electrical devices connected to this generator. Connected devices may increase the difficulty in starting the engine.

2.Confirm that this generator is properly grounded. (See “Ground the Generator” section of this manual.)

3.Turn the fuel valve to the “on” position.

4.Move the choke lever to the “closed” position.

5.Set the engine switch to the “on” position.

6.Slowly pull on the recoil starter handle, shown in Figure 4, until a slight resistance is felt. Then pull briskly to start the engine. Gently return the cord into the generator to avoid damage to the starter or housing. Never allow the cord to snap back.

7.If the engine fails to start, repeat step 6. NOTE: After repeated attempts to start the engine, consult the troubleshooting guide before attempting again. If problems persist, call 1-888-287-6981, Monday - Friday, 8 AM - 4 PM Central Time.

8.Once the engine has started and runs for about a minute, move the choke lever approximately half way towards the “open” position. Wait an additional 30 seconds and then move the choke lever completely over to the “open” position.

9.Allow this generator to run for several minutes before connecting any electrical devices.

Figure 4

The Recoil Start is located on the left side of the generator.

GEN154 2000 Surge Watts/1500 Running Watts Portable Generator

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Portable Generator Features Table of Contents Recognize Safety SYMBOLS, Words and Labels Important Safety Instructions Legal RequirementsPage Page Page Package Contents Generator Components Using this Generator for the First-Time Preparing the Generator for USEAdd Gasoline Subsequent Use of this Generator Verify Oil LevelStarting the Generator Using the Generator AC UsageDo not connect 50Hz or 3-phase loads to this generator Some Notes about Power Cords DC UsageCleaning the Generator MAINTENANCE/CARERecommended Maintenance Schedule Stopping the GeneratorChecking the Oil Level Changing/Adding OilEmptying the Fuel Tank Air Filter MaintenanceSpark Plug Maintenance STORAGE/TRANSPORT Procedures TroubleshootingPage Page GEN1540809

GEN154 specifications

The Buffalo Tools GEN154 is an innovative and robust electric generator designed to provide reliable power solutions for a variety of applications. This generator is ideal for outdoor activities, emergency backup, and job sites, making it a versatile choice for both home and professional users.

One of the standout features of the GEN154 is its powerful 1500-watt output capability. This makes it suitable for running small appliances, tools, and lighting, ensuring that you have access to electricity wherever you need it. With a maximum output of 1800 watts, it can handle sudden power surges, making it perfect for powering devices that require a little extra energy at startup.

This generator is powered by a reliable four-stroke engine, known for its efficiency and low emissions. The engine is designed for easy starting, boasting an integrated recoil start mechanism that allows for quick power access. Its compact design, combined with a lightweight construction, makes it easy to transport and store, enhancing its usability for those on the go.

The Buffalo Tools GEN154 also features multiple power outlets, including standard AC outlets and a DC outlet, enabling users to connect various devices simultaneously. The built-in circuit breaker provides additional safety, protecting against overloading and ensuring the longevity of both the generator and connected devices.

Another noteworthy characteristic of this generator is its low noise operation. The GEN154 is engineered to produce minimal sound, making it suitable for environments where noise might be a concern, such as camping or tailgating events. This quiet performance does not compromise on power, delivering steady electricity without disruptive noise.

Additionally, the generator has a durable frame, built to withstand rugged conditions. This construction ensures that it can handle the rigors of outdoor use, safeguarding the internal components from damage. The user-friendly control panel is designed with accessibility in mind, allowing for easy operation and monitoring of power output.

In summary, the Buffalo Tools GEN154 is a reliable and powerful generator, equipped with essential features such as a strong engine, multiple outlets, low noise operation, and a durable build. Whether for recreational use, emergencies, or job sites, it offers a solid solution for anyone in need of portable power.
Top Page Image Contents