Buffalo Tools GEN154 instruction manual Checking the Oil Level, Changing/Adding Oil

Page 19

Checking the Oil Level

It is important to check the oil level in the engine crankcase before each use to ensure that there is a sufficient quantity.

To check the oil level:

1.Verify that this generator is shut down and on a level surface.

2.Unscrew the oil filler/dipstick cap from the engine.

3.With a dry cloth, wipe the oil off of the dipstick that is located on the inside of the cap.

4.Insert the dipstick as if replacing the cap and then remove again. There should be oil on the dipstick. If there is no oil on the dipstick, or oil is visible only at the very end of the dipstick, add oil until the engine crankcase is filled.

5.Confirm that the oil filler/dipstick cap is properly in place when finished verifying the oil level.

Changing/Adding Oil

The oil level in this generator should be checked before each use. (See Figure 9.) When the oil level is low, add oil until the level is sufficient to operate this generator.

The oil capacity for this Model GEN154 2000 Surge Watts / 1500 Running Watts Portable Generator engine is 13.5 fluid oz. (0.40 L).

To drain the oil from this generator:

It is necessary to drain the oil from the crankcase only if it has become contaminated with water and/or dirt.

1.Place a bucket underneath this generator to catch oil as it drains.

2.Unscrew the oil drain plug located on the crankcase underneath the oil filler/dipstick cap.

3.Allow all the oil to drain from this generator.

4.Replace the oil drain plug and tighten.

NOTE: Never dispose of used motor oil in the trash, down a drain or on the ground. Put oil in a sealed container and contact your local recycling center or auto garage to arrange oil disposal.

To add oil to the engine crankcase:

1.Confirm that this generator is on a level surface.

2.Unscrew the oil filler/dipstick cap from the engine as illustrated in Figure 8 below.

3.Using a funnel, add high detergent motor oil to fill the engine crankcase to the correct quantity. SAE10W-30 oil is recommended for general use. When the engine crankcase is full, the oil level should reach the lower lip of the oil filling opening as shown in Figure 8.

Oil Capacity (fluid oz./L)

13.5 / 0.40

Oil Type Recommended

High Detergent Motor Oil, SAE10W-30

Figure 8 – Adding oil

GEN154 2000 Surge Watts/1500 Running Watts Portable Generator

19

Image 19
Contents Portable Generator Features Table of Contents Recognize Safety SYMBOLS, Words and Labels Legal Requirements Important Safety InstructionsPage Page Page Package Contents Generator Components Preparing the Generator for USE Using this Generator for the First-TimeAdd Gasoline Verify Oil Level Subsequent Use of this GeneratorStarting the Generator AC Usage Using the GeneratorDo not connect 50Hz or 3-phase loads to this generator DC Usage Some Notes about Power CordsStopping the Generator MAINTENANCE/CARERecommended Maintenance Schedule Cleaning the GeneratorChanging/Adding Oil Checking the Oil LevelSpark Plug Maintenance Air Filter MaintenanceEmptying the Fuel Tank Troubleshooting STORAGE/TRANSPORT ProceduresPage Page GEN1540809

GEN154 specifications

The Buffalo Tools GEN154 is an innovative and robust electric generator designed to provide reliable power solutions for a variety of applications. This generator is ideal for outdoor activities, emergency backup, and job sites, making it a versatile choice for both home and professional users.

One of the standout features of the GEN154 is its powerful 1500-watt output capability. This makes it suitable for running small appliances, tools, and lighting, ensuring that you have access to electricity wherever you need it. With a maximum output of 1800 watts, it can handle sudden power surges, making it perfect for powering devices that require a little extra energy at startup.

This generator is powered by a reliable four-stroke engine, known for its efficiency and low emissions. The engine is designed for easy starting, boasting an integrated recoil start mechanism that allows for quick power access. Its compact design, combined with a lightweight construction, makes it easy to transport and store, enhancing its usability for those on the go.

The Buffalo Tools GEN154 also features multiple power outlets, including standard AC outlets and a DC outlet, enabling users to connect various devices simultaneously. The built-in circuit breaker provides additional safety, protecting against overloading and ensuring the longevity of both the generator and connected devices.

Another noteworthy characteristic of this generator is its low noise operation. The GEN154 is engineered to produce minimal sound, making it suitable for environments where noise might be a concern, such as camping or tailgating events. This quiet performance does not compromise on power, delivering steady electricity without disruptive noise.

Additionally, the generator has a durable frame, built to withstand rugged conditions. This construction ensures that it can handle the rigors of outdoor use, safeguarding the internal components from damage. The user-friendly control panel is designed with accessibility in mind, allowing for easy operation and monitoring of power output.

In summary, the Buffalo Tools GEN154 is a reliable and powerful generator, equipped with essential features such as a strong engine, multiple outlets, low noise operation, and a durable build. Whether for recreational use, emergencies, or job sites, it offers a solid solution for anyone in need of portable power.