Buffalo Tools GEN154 instruction manual DC Usage, Some Notes about Power Cords

Page 17

SOME NOTES ABOUT POWER CORDS

Long or thin cords can require more wattage from a generator to power an electrical device. Figure 6 shows the recommended cords according to the power requirement of the electrical device. When using cords that exceed these specifications, allow for the electrical device to have a slightly higher rated wattage requirement.

Device Requirements

 

Max. Cord Length (ft) by Wire Gauge

 

Amps

Watts (120V)

Watts (240V)

#8 wire

#10 wire

#12 wire

#14 wire

#16 wire

2.5

300

600

NR

1000

600

375

250

5

600

1200

NR

500

300

200

125

7.5

900

1800

NR

350

200

125

100

10

1200

2400

NR

250

150

100

50

15

1800

3600

NR

150

100

65

NR

20

2400

4800

175

125

75

50

NR

25

3000

6000

150

100

60

NR

NR

30

3600

7200

125

65

NR

NR

NR

40

4800

9600

90

NR

NR

NR

NR

NR = Not Recommended.

Figure 6 - Maximum Extension Cord Lengths by Power Requirement

DC Usage

The DC outlet is only for recharging 12 Volt automotive-type batteries. Do not connect any other device to this outlet.

Use this generator only for recharging 12 Volt batteries. NEVER attempt to jumpstart a car with this generator.

Failing to use the correct procedure can cause a battery to explode, seriously injuring anyone nearby. Keep heat, sparks, flame and smoking materials away from the battery.

To connect 12 Volt batteries to the DC outlet:

1.Connect one charging wire to the positive terminal of the battery and the other charging wire to the negative terminal of the battery.

2.Connect the free end of the positive wire to the positive side of the outlet on this generator.

3.Start this generator.

4.Carefully connect the free end of the negative wire to the negative side of the outlet on this generator.

5.When disconnecting, always disconnect the wires from this generator first to avoid a spark.

Storage batteries emit highly explosive hydrogen gas when charged.

Batteries also contain acid, which can cause severe chemical burns.

Do not allow open flames or cigarettes nearby for several minutes after charging a battery.

Always wear protective goggles and rubber gloves when charging a battery.

If battery acid gets on the skin, flush with water.

If battery acid gets in the eyes, flush with water and immediately call a physician.

If battery acid is swallowed, drink large quantities of milk and immediately call a physician.

Do not secure the generator with a chain or rope, which would prevent it from being moved in an emergency.

GEN154 2000 Surge Watts/1500 Running Watts Portable Generator

17

Image 17
Contents Portable Generator Features Table of Contents Recognize Safety SYMBOLS, Words and Labels Legal Requirements Important Safety InstructionsPage Page Page Package Contents Generator Components Preparing the Generator for USE Using this Generator for the First-TimeAdd Gasoline Verify Oil Level Subsequent Use of this GeneratorStarting the Generator AC Usage Using the GeneratorDo not connect 50Hz or 3-phase loads to this generator DC Usage Some Notes about Power CordsRecommended Maintenance Schedule MAINTENANCE/CARECleaning the Generator Stopping the GeneratorChanging/Adding Oil Checking the Oil LevelEmptying the Fuel Tank Air Filter MaintenanceSpark Plug Maintenance Troubleshooting STORAGE/TRANSPORT ProceduresPage Page GEN1540809

GEN154 specifications

The Buffalo Tools GEN154 is an innovative and robust electric generator designed to provide reliable power solutions for a variety of applications. This generator is ideal for outdoor activities, emergency backup, and job sites, making it a versatile choice for both home and professional users.

One of the standout features of the GEN154 is its powerful 1500-watt output capability. This makes it suitable for running small appliances, tools, and lighting, ensuring that you have access to electricity wherever you need it. With a maximum output of 1800 watts, it can handle sudden power surges, making it perfect for powering devices that require a little extra energy at startup.

This generator is powered by a reliable four-stroke engine, known for its efficiency and low emissions. The engine is designed for easy starting, boasting an integrated recoil start mechanism that allows for quick power access. Its compact design, combined with a lightweight construction, makes it easy to transport and store, enhancing its usability for those on the go.

The Buffalo Tools GEN154 also features multiple power outlets, including standard AC outlets and a DC outlet, enabling users to connect various devices simultaneously. The built-in circuit breaker provides additional safety, protecting against overloading and ensuring the longevity of both the generator and connected devices.

Another noteworthy characteristic of this generator is its low noise operation. The GEN154 is engineered to produce minimal sound, making it suitable for environments where noise might be a concern, such as camping or tailgating events. This quiet performance does not compromise on power, delivering steady electricity without disruptive noise.

Additionally, the generator has a durable frame, built to withstand rugged conditions. This construction ensures that it can handle the rigors of outdoor use, safeguarding the internal components from damage. The user-friendly control panel is designed with accessibility in mind, allowing for easy operation and monitoring of power output.

In summary, the Buffalo Tools GEN154 is a reliable and powerful generator, equipped with essential features such as a strong engine, multiple outlets, low noise operation, and a durable build. Whether for recreational use, emergencies, or job sites, it offers a solid solution for anyone in need of portable power.