Chicago Electric 98391 manual Basic Specifications, Unpacking, Set Up Instructions, Location

Page 8

Basic Specifications

Fuel

 

Type

#2 Diesel Fuel

 

 

 

 

Capacity

4.2 Gallons

 

 

 

 

 

 

Engine Oil

 

Type

SAE 5W40

 

 

 

 

Capacity

1-3/4 qts.

 

 

 

Rated Wattage

5,000 Watts

Maximum Wattage

6,000 Watts

Run Time @ 75% Load

8.5 Hours with full tank

Sound Level

 

75 dB @ 23’

Note: Additional specifications found in the Technical Engine Specifi- cations chart in this manual.

At high altitudes, the engine’s carbu- retor, governor, and any other parts that control the fuel-air ratio will need to be adjusted by a qualified mechanic to allow efficient high-altitude use and to prevent damage to the engine and any other de- vices used with this product.

Unpacking

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

Set Up Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

To prevent serious injury

from accidental starting:

Turn the Power Switch of the equipment to its “OFF” position, wait for the engine to cool before assembling or making any adjustments to the equipment.

To prevent serious injury:

Operate only with proper spark arrestor installed.

Operation of this equipment may create sparks that can start fires around dry vegetation.

A spark arrestor may be required.

The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

Location

1.The Generator must be installed outdoors where ventilation is readily available.

2.Install the Generator so that the air inlets and outlets are not blocked by obstructions­ such as bushes, trees, or snow drifts. Locating it in the path of heavy winds or snowdrifts may require the placement of a barrier for protection. The air inlet should face the prevailing wind direction.

SKU 98391

For technical questions, please call 1-800-444-3353.

Page 8

Image 8
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsContents Fuel injection pump Parts List & diagram Set up precautions Save This ManualOperating precautions Carbon Monoxide Hazard Using an engine indoorsService precautions For technical questions, please call Basic Specifications Set Up InstructionsUnpacking LocationControls 120V GfciStarting the Engine Operating InstructionsGrounding How to Shut Engine Off SKU For technical questions, please callDecompression Handle To Power Tools and Equipment Equipment OperationMounting Hole Pattern Shaft Size/Type Servicing Technical SpecificationsMaintenance Procedures Air Filter Element Maintenance Diesel Fuel and Microbes Cleaning, Maintenance, Lubrication ScheduleStorage Troubleshooting Problem Possible Causes Probable Solutions Engine backfires AC output, but noRecord Product’s Serial Number Here Main assembly PartsPart Description Qty Main Assembly Diagram Cylinder Block Assembly Parts List Cylinder block assembly diagram Cylinder head Assembly Parts List Diagram Cylinder Head Bonnet Parts List & diagram Piston & connecting Rod Parts List Diagram Crank shaft Flywheel Parts List Diagram Camshaft assembly Parts List & diagram Air cleaner assembly Parts List & diagram Oil System Parts List Diagram Fuel injection pump Parts List & diagram Fuel Nozzle Parts List Diagram Governor & Control System Parts List & Diagram Fuel tank and pipe Parts List & diagram Muffler Parts List Diagram Starting motor Parts List & diagramGenerator Parts List Diagram Control panel Parts List & diagram Wiring diagram Limited 1 year / 90 Day warranty Emission Control System Warranty United States Emission Control Defects Warranty StatementAir Induction System