Chicago Electric 92456 operating instructions INSPECTION, CLEANING, and Maintenance, See Figure H

Page 16

POSITIVE (+) DC TERMINAL (7)

10 AMP

NEGATIVE (-) DC TERMINAL (7)DC FUSE

(9)

FIGURE H

5.When finished using the Generator, turn the Engine Power Switch (2) to its “OFF” position. Turn the Fuel Valve (40B) to its “OFF” position. Then, disconnect the electrical powered tool or equipment from the Generator’s DC Terminals (7).

(See Figure H.)

6.After the Engine and Generator have completely cooled, store the Generator in a safe, clean, dry location (if not already installed in one).

7.NOTE: The Generator features a 10 AMP DC Fuse (9) to protect the DC circuit in case of an overload. Should an overload occur the Fuse will burn out, causing the Generator to automatically shut down. In this case, refer to Step #1 in this section. Then, reset the circuitry system by replacing the burnt Fuse with a new 10 AMP DC Fuse. Restart the Generator and continue powering the remaining tool or equipment. (See Figure H.)

INSPECTION, CLEANING, AND MAINTENANCE

1.CAUTION! Always make sure the Engine Power Switch (2) is in its “OFF” po- sition. Disconnect the spark plug wire from the engine and allow sufficient time for the Engine and Generator to completely cool before performing any inspection, maintenance, or cleaning.

2.Before each use, inspect the general condition of the Generator. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, dam- aged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.

Do not use damaged equipment.

SKU 92456

For technical questions, please call 1-800-444-3353.

Page 16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents For technical questions and replacement parts, please call Generator SETSave this Manual Product SpecificationsSKU For technical questions, please call Electrical Safety UnpackingWork Area Read and Understand ALL InstructionsPersonal Safety Service Generator USE and CareSpecific Product Warnings and Precautions Heart Pacemaker Precaution Installation PrecautionsFire and Explosion Precautions Mechanical Precautions Chemical PrecautionsElectrical Precautions Noise PrecautionsRequired Minimum Extension Cord Gauge 120 Volt Installation General LocationAssembly Diagrams on pages 19 Generator Support and MountingGrounding the Generator Operating InstructionsFigure B To Start The Engine Figure F See Figure GPowering 120 Volt AC Tools And Equipment See Figure H, nextINSPECTION, CLEANING, and Maintenance See Figure HEngine Maintenance Schedule DetailsParts List Please Read the Following CarefullyAssembly Diagram Parts List 73A 72A 71A 77A 76A 70A 69A 75A 74A Wiring Diagram Year Warranty Owner’s Warranty ResponsibilitiesO C h a r g e R e p a i r o r Replacement Service and MaintenanceLength of Coverage O n s e q u e n t i a l D a m a g e s Coverage

92456 specifications

The Chicago Electric 92456 is a versatile and powerful tool designed for a variety of woodworking projects, particularly known for its efficiency and user-friendly features. This compact router model is ideal for both professionals and hobbyists, providing an excellent balance of performance and affordability.

One of the standout features of the Chicago Electric 92456 is its robust 2.5 HP motor, which delivers ample power for demanding tasks. This motor supports variable speed settings, allowing users to adjust the RPM from 8,000 to 25,000. The ability to fine-tune the speed is essential for different applications, ensuring a clean and precise finish regardless of the material being routed.

The design of the Chicago Electric 92456 emphasizes ease of use and versatility. It comes with a soft-start feature that reduces the initial torque when the router is powered on, minimizing the chances of the tool jumping or causing uneven cuts. Additionally, the ergonomic handle design provides a comfortable grip, which helps to reduce fatigue during extended use, making it ideal for both amateurs and seasoned woodworkers.

This router is equipped with a dual LED work light, illuminating the work area to improve visibility and precision. This feature is particularly useful for detailed tasks or when working in environments with low lighting. The integrated dust collection port also plays a vital role in maintaining a clear workspace, enhancing both safety and cleanliness.

The Chicago Electric 92456 supports both 1/4-inch and 1/2-inch collets, enabling users to adapt the tool for various bits and applications. It also includes depth adjustment features for increased accuracy, ensuring that every cut meets the desired specifications.

In terms of construction, the router boasts a sturdy base that provides stability and balance during operation. This robust build is designed to withstand the rigors of frequent use, making it a reliable addition to any workshop.

Overall, the Chicago Electric 92456 is a well-rounded router that combines power, precision, and user-friendly features. Its adaptability and design make it an excellent choice for anyone looking to enhance their woodworking capabilities, whether for small home projects or larger professional endeavors.
Top Page Image Contents