Chicago Electric 92456 operating instructions Installation, General Location

Page 10

8.Keep all electrical equipment clean and dry. Replace any wiring where the insu- lation is cracked, cut, abraded or otherwise degraded. Replace terminals that are worn, discolored, or corroded. Keep terminals clean and tight.

9.Insulate all connections and disconnected wires.

10.Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures.

11.Use only Class BC or Class ABC fire extinguishers on electrical fires.

INSTALLATION

1.NOTE: Prior to powering tools and equipment, make sure the Generator’s rated voltage, wattage, and amperage capacity (115 V - 20 Amps) is adequate to supply all electrical loads that the unit will power. If powering exceeds the Gen- erator’s capacity, it may be necessary to group one or more of the tools and/or equipment for connection to a separate Generator.

2.Electrical and other permits may be required for the installation of emergency power systems. Investigate the local building and electrical codes before install- ing this unit. Installation must be completed by licensed contractors.

3.WARNING! The Generator is quite heavy. Use care and the proper lifting or hoisting equipment when moving it to the installation location. Always connect hoist lines to the Frame (41B) of the Generator.

GENERAL LOCATION

1.It is recommended to locate and install the Generator outdoors where cooling air is readily available.

2.Install the Generator so that the air inlets and outlets are not blocked by obstruc- tions such as bushes, trees, or snow drifts. Locating it in the path of heavy winds or snowdrifts may require the placement of a barrier for protection. The air inlet, in normal weather conditions, should face the prevailing wind direction.

3.Install the Generator on a concrete slab or other area where rain drainage or flood waters can not reach it.

4.Generator placement should allow four feet of access to all sides for mainte- nance.

SKU 92456

For technical questions, please call 1-800-444-3353.

Page 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents For technical questions and replacement parts, please call Generator SETSave this Manual Product SpecificationsSKU For technical questions, please call Work Area Electrical SafetyUnpacking Read and Understand ALL InstructionsPersonal Safety Service Generator USE and CareSpecific Product Warnings and Precautions Heart Pacemaker Precaution Installation PrecautionsFire and Explosion Precautions Mechanical Precautions Chemical PrecautionsElectrical Precautions Noise PrecautionsRequired Minimum Extension Cord Gauge 120 Volt Installation General LocationGrounding the Generator Assembly Diagrams on pages 19Generator Support and Mounting Operating InstructionsFigure B To Start The Engine Figure F See Figure GPowering 120 Volt AC Tools And Equipment See Figure H, nextINSPECTION, CLEANING, and Maintenance See Figure HEngine Maintenance Schedule DetailsParts List Please Read the Following CarefullyAssembly Diagram Parts List 73A 72A 71A 77A 76A 70A 69A 75A 74A Wiring Diagram Year Warranty Owner’s Warranty ResponsibilitiesLength of Coverage O C h a r g e R e p a i r o r ReplacementService and Maintenance O n s e q u e n t i a l D a m a g e s Coverage

92456 specifications

The Chicago Electric 92456 is a versatile and powerful tool designed for a variety of woodworking projects, particularly known for its efficiency and user-friendly features. This compact router model is ideal for both professionals and hobbyists, providing an excellent balance of performance and affordability.

One of the standout features of the Chicago Electric 92456 is its robust 2.5 HP motor, which delivers ample power for demanding tasks. This motor supports variable speed settings, allowing users to adjust the RPM from 8,000 to 25,000. The ability to fine-tune the speed is essential for different applications, ensuring a clean and precise finish regardless of the material being routed.

The design of the Chicago Electric 92456 emphasizes ease of use and versatility. It comes with a soft-start feature that reduces the initial torque when the router is powered on, minimizing the chances of the tool jumping or causing uneven cuts. Additionally, the ergonomic handle design provides a comfortable grip, which helps to reduce fatigue during extended use, making it ideal for both amateurs and seasoned woodworkers.

This router is equipped with a dual LED work light, illuminating the work area to improve visibility and precision. This feature is particularly useful for detailed tasks or when working in environments with low lighting. The integrated dust collection port also plays a vital role in maintaining a clear workspace, enhancing both safety and cleanliness.

The Chicago Electric 92456 supports both 1/4-inch and 1/2-inch collets, enabling users to adapt the tool for various bits and applications. It also includes depth adjustment features for increased accuracy, ensuring that every cut meets the desired specifications.

In terms of construction, the router boasts a sturdy base that provides stability and balance during operation. This robust build is designed to withstand the rigors of frequent use, making it a reliable addition to any workshop.

Overall, the Chicago Electric 92456 is a well-rounded router that combines power, precision, and user-friendly features. Its adaptability and design make it an excellent choice for anyone looking to enhance their woodworking capabilities, whether for small home projects or larger professional endeavors.
Top Page Image Contents