Chicago Electric 98452 operating instructions Operating Instructions, See Figure B, next

Page 13

AC Applications

1.Before connecting an appliance or power cord to the generator: Make sure that it is in good working order. Faulty appliances or power cords can create a potential for electrical shock.

2.If an appliance begins to operate abnormally, becomes sluggish or stops suddenly, turn it off immediately. Disconnect the appliance, and determine whether the problem is the appliance, or if the rated load capacity of the generator has been exceeded.

3.Make sure that the electrical rating of the tool or appliance does not exceed that of the generator. Never exceed the maximum power rating of the generator. Power levels between rated and maximum may be used for no more than 30 minutes.

4.Substantial overloading will open the circuit breaker. Exceeding the time limit for maximum power operation or slightly overloading the generator may not switch the circuit breaker or circuit protector OFF, but will shorten the service life of the generator.

OPERATING INSTRUCTIONS

NOTE: For additional references to the parts listed in the following pages, refer to the Assembly Diagrams on pages 21 and 23.

Pre-Start Checks:

1.Check to make sure the Engine’s Power Switch (2) is in its OFFposition.

(See Figure B, next page.)

2.IMPORTANT! Prior to first using the Generator, the Engine MUST be filled with approximately 3/4 (0.63) quart of a high quality SAE 10W-30 grade engine oil. To do so, unscrew and remove the Oil Dipstick (65A). Pour engine oil into the oil Fill hole until the level of oil is even with the bottom edge of the oil fill hole (if you cannot see the oil through the oil fill hole, then the oil is too low and more oil must be added). Then, screw the Dipstick back into the Oil Fill Hole. (See Figure C, next page.)

SKU 98452

For technical questions, please call 1-800-444-3353.

Page 13

Image 13
Contents Portable Generator For technical questions or replacement parts, please callSave this Manual SpecificationsFor technical questions, please call Electrical Safety General Safety RulesUnpacking Work AreaGenerator USE and Care Personal SafetyService For technical questions, please call Heart Pacemaker Precaution Installation Precautions Specific Safety Rules and PrecautionsKeep the Generator and surrounding areas clean at all times Fire and Explosion PrecautionsUse only Engine manufacturer recommended fuel and oil Chemical Precautions Mechanical PrecautionsElectrical Precautions Noise PrecautionInsulate all connections and disconnected wires InstallationGeneral Locations SKU For technical questions, please callGenerator Support and Mounting This Unit can Power the Following ItemsGrounding the Generator See Figure BSee Figure B, next Operating InstructionsREV 09h See Figure E To Start The EngineSee Figure G To its OFF position. See Figure D Powering 120 Volt AC Tools and EquipmentSee Figure H INSPECTION, MAINTENANCE, and Cleaning Please Read the Following Carefully Parts ListPart Description Qty Assembly Diagram Parts List Assembly Diagram Owner’s Warranty Responsibilities Limited 1 year warrantyService and Maintenance No Charge Repair or ReplacementLength of Coverage Consequential Damages Coverage

98452 specifications

The Chicago Electric 98452 is a powerful and versatile tool designed for both professional and hobbyist woodworkers. This band saw stands out due to its robust build and a combination of innovative features that enhance usability and performance. With a 9-inch throat depth and a 12-inch cutting height, it offers significant capacity for a range of cutting applications, allowing users to tackle intricate curves and thick materials with ease.

One of the key characteristics of the Chicago Electric 98452 is its strong 2.5-amp motor, which provides ample power to cut through different types of wood with precision. This motor supports variable speeds, enabling users to adjust the cutting speed according to the material's density. This flexibility is crucial for achieving accurate cuts, especially when working with softer woods or harder composites.

The saw features a lightweight and portable design, making it convenient for users who may need to move their equipment around a workshop or transport it to job sites. The solid steel frame ensures stability during operations, minimizing vibrations that can lead to inaccurate cuts. The base is sturdy and provides added safety, ensuring that the unit remains secure during use.

The Chicago Electric 98452 is equipped with a built-in work light that illuminates the cutting area, improving visibility for detailed work. Additionally, its adjustable blade guides assist in maintaining blade alignment, which is essential for achieving clean, precise cuts consistently.

Another significant advantage of the Chicago Electric 98452 is its ease of blade changes. The saw is designed with tool-free blade tension adjustment, allowing users to swap out blades quickly and without hassle. This feature saves time and ensures that users can keep the right blade engaged for their specific project needs.

Safety features are also a priority in the design of the Chicago Electric 98452. It includes a safety switch to prevent accidental start-ups and a blade guard that protects users from potential hazards.

Overall, the Chicago Electric 98452 band saw is an excellent choice for those seeking a reliable, powerful, and user-friendly tool. Its combination of impressive features, effective technologies, and thoughtful characteristics makes it a valuable addition to any woodworking arsenal, suitable for both novice and experienced woodworkers alike.