Chicago Electric 90300 manual Installation Precautions

Page 7

manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Installation Precautions:

1.WARNING! Before using the Generator, read and understand the Engine manufacturer’s Operation, Maintenance, and Parts manual. Also, read the safety precautions in this manual. These should always be followed to reduce the risk of personal injury and damage to equipment.

2.Ensure installation meets all applicable safety, and local and national electrical codes. Have installation performed by a qualified, licensed electrician and building contractor.

3.All electrical work, including the earth-ground connection, should be completed by a licensed electrician.

4.Any separate fuel storage Generator supply facility must be built or installed in full compliance with all relevant local, state, and federal regulations.

5.If the generator is installed indoors, exhaust fumes must be piped out of the building using leak-free, heat-resistant piping. Pipes and silencer should not use any flammable materials, nor should they be installed near the same. Generator exhaust fumes must be within legal limits, including all local codes and ordinances.

6.The Generator is designed to be a portable unit. If however, the generator is to be permanently installed outdoors, it must be weatherproofed and should be soundproofed. Always follow local or state building codes. It should not be run outdoors without protection to the Generator and wiring conduit.

7.Never lift the Generator using the engine or alternator lifting lugs. Connect lifting equipment to the Frame of the Generator.

8.Before lifting the Generator, ensure the lift rigging and supporting structure are in good condition, and are rated to lift such a load.

9.Keep all personnel away from the suspended generator during relocating.

10.The supporting floor/ground surface should be level, and strong enough to safely hold the weight of the Generator. If the floor/ground surface is not level, strong cross members should be placed under the full length of the Generator Frame at its low side.

SKU 90300 For technical questions, please call 1-800-444-3353.

PAGE 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents For technical questions, please call GeneratorDescription Product SpecificationsSave this Manual UnpackingWork Area General Safety RulesPersonal Safety Generator USE and Care ServiceIndustrial applications must follow Osha requirements Specific Product Warnings and PrecautionsInstallation Precautions Mechanical Precautions Fire And Explosion PrecautionsNoise Precautions Chemical PrecautionsRequired Minimum Extension Cord Gauge 120/ 240 Volt Electrical PrecautionsInstallation See Figure H, General LocationGenerator Support and Mounting Grounding the GeneratorREV 12/04 Assembly Diagram onTo Install a Battery Operating InstructionsSee Figure D Pre-Start ChecksSee Figure E See Figure F To Start The GeneratorSee Figure H Powering Tools And Equipment Please Read the Following Carefully INSPECTION, MAINTENANCE, and CleaningParts List Wiring Diagram SKU Assembly DiagramWarranty Card Year Warranty
Related manuals
Manual 19 pages 31.15 Kb

90300 specifications

The Chicago Electric 90300 is a versatile and powerful tool that stands out in the realm of portable generators, tailored for both personal and professional use. With a design focused on efficiency and reliability, it serves as an ideal solution for applications ranging from home backup power to outdoor activities like camping or tailgating.

One of the main features of the Chicago Electric 90300 is its robust 2,500-watt peak power and a continuous output of 2,500 watts. This capacity is more than sufficient for powering essential appliances such as refrigerators, lights, and other household equipment during outages. It’s particularly valued for its ability to deliver surge power, enabling it to handle higher wattage appliances temporarily without compromising performance.

The generator is equipped with a 7-horsepower, four-stroke engine, which not only enhances its operational capabilities but also promotes fuel efficiency. This engine runs on gasoline, allowing for easy access to fuel and convenient operation. The inclusion of a low oil shutoff feature ensures that the engine stops running when the oil level dips below a certain threshold, thereby extending the generator's life and preventing potential damage.

The Chicago Electric 90300 features a user-friendly control panel, which includes multiple outlets, making it easy to connect various devices simultaneously. The panel typically includes standard 120V outlets, ensuring compatibility with most household appliances. Additionally, some models may include USB ports for charging smaller devices, catering to the modern user's needs.

Portability is another critical aspect of the Chicago Electric 90300. The generator comes with a sturdy frame and built-in wheels, making it easy to transport to different locations, whether for emergency usage at home or during recreational outings. Its lightweight design contributes to its ease of mobility, while the durable construction provides the robustness necessary to withstand different environments.

Noise operation is also a factor to consider. The Chicago Electric 90300 operates at a reasonable noise level, making it suitable for use in residential areas and outdoor settings where quiet is preferred.

In summary, the Chicago Electric 90300 is an efficient, reliable, and user-friendly portable generator that meets a variety of power needs. It combines a powerful engine, generous wattage output, safety features, and portability, making it an excellent choice for those seeking a dependable backup power source or a handy tool for outdoor adventures.
Top Page Image Contents