Chicago Electric 92455 manual Powering 120 Volt AC Tools And Equipment, See Figure H, next

Page 15

Powering 120 Volt AC Tools And Equipment:

1.Prior to powering tools and equipment, make sure the Generator’s rated voltage, and amperage capacity (115 VAC / 20 Amps) is adequate to supply all electri- cal loads that the unit will power. If powering exceeds the Generator’s capacity, it may be necessary to group one or more of the tools and/or equipment for con- nection to a separate generator.

2.Once the Generator is running, simply connect the Power Cords of 115 volt AC powered tools and equipment into the 115 volt AC Dual Outlets (6).

(See Figure G.)

3.NOTE: The Generator features an AC Non-Fuse Circuit Breaker (5) to protect the AC circuit in case of an overload. Should an overload occur the Breaker will “trip” to its “OFF” position, causing the Generator to automatically shut down. In this case, refer to Step #1 above in this section. Then, reset the circuitry system by turning the Circuit Breaker to its “ON” position. Restart the Generator and con- tinue powering the remaining tools and equipment. (See Figure D.)

4.When finished using the Generator, turn the Engine Power Switch (2) to its “OFF” position. Turn the Fuel Valve (40B) to its “OFF” position. Then, disconnect all electrical powered tools and equipment from the Generator’s 115 volt AC Dual Outlets (6). (See Figures E, F, and G.)

5.After the Engine and Generator have completely cooled, store the Generator in a safe, clean, dry location (if not already installed in one).

Powering 12 Volt DC Tools And Equipment:

1.Prior to powering a tool or equipment, make sure the Generator’s rated voltage, and amperage capacity (12 VDC / 10 Amps) is adequate to supply all electrical loads that the unit will power. If powering exceeds the Generator’s capacity, it may be necessary to group one or more of the tools and/or equipment for con- nection to a separate generator.

2.Connect the Power Cord of a 12 VDC powered tool or equipment to the DC Ter- minals (7). NOTE: Make sure to connect the positive (+) lead of the Power Cord to the positive (+) Terminal on the Generator, and connect the negative (-)lead of the Power Cord to the negative (-)Terminal on the Generator.

(See Figure H, next page.)

3.If using only a 12 volt DC tool or equipment, turn the 120 volt AC Circuit Breaker

(5) to its “OFF” position. (See Figure D.)

SKU 92455

For technical questions, please call 1-800-444-3353.

Page 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Generator SET For technical questions and replacement parts, please callProduct Specifications Save this ManualSKU For technical questions, please call Work Area General Safety RulesElectrical Safety UnpackingPersonal Safety Generator USE and Care ServiceHeart Pacemaker Precaution Installation Precautions Specific Product Warnings and PrecautionsFire and Explosion Precautions Chemical Precautions Mechanical PrecautionsElectrical Precautions Noise PrecautionsGeneral Location InstallationOperating Instructions Assembly Diagrams on pages 19Generator Support and Mounting Grounding the GeneratorFigure B REV 03/06 SKU For technical questions, please call Figure DSee Figure G Figure FSee Figure H, next Powering 120 Volt AC Tools And EquipmentSee Figure H INSPECTION, CLEANING, and MaintenanceDo not use damaged equipment Engine Maintenance SchedulePlease Read the Following Carefully Parts ListAssembly Diagram Parts List 73A 72A 71A 77A 76A 70A 69A 75A 74A Wiring Diagram Owner’s Warranty Responsibilities Year WarrantyO n s e q u e n t i a l D a m a g e s Coverage O C h a r g e R e p a i r o r ReplacementService and Maintenance Length of Coverage

92455 specifications

The Chicago Electric 92455 is a premier power tool designed for both the novice DIY enthusiast and the seasoned professional. This versatile tool integrates a variety of features that enhance its functionality, making it a valuable addition to any workshop.

One of the standout characteristics of the Chicago Electric 92455 is its robust 8-inch wet tile saw capability. With its powerful 1.5 horsepower motor, it can handle tough materials with ease, providing efficient and precise cuts. This saw is particularly useful for cutting ceramic, porcelain, and glass tiles, thanks to its sharp and durable diamond blade. The adjustable cutting head allows users to perform both 45-degree and straight cuts, adding to its versatility when working on different projects.

The Chicago Electric 92455 incorporates advanced water cooling technology, which ensures that the tile saw remains at optimal temperatures during operation. This helps eliminate the risk of overheating and extends the lifespan of the blade, allowing for clean and accurate cuts without the risk of cracking or damaging the tile. The integrated water reservoir feeds water directly onto the blade, reducing dust and debris, which not only keeps the work area cleaner but also enhances visibility for users.

Another noteworthy feature is the built-in measuring guide and adjustable table. The guide helps users achieve precise measurements for repetitive cuts, while the adjustable table provides added stability and support for larger tiles. This combination ensures that even large-format tiles can be cut efficiently and quickly.

Safety is also a priority with the Chicago Electric 92455. The saw includes features such as a blade guard for protection and a secure locking switch to prevent accidental activation. These safety measures are essential when working with heavy-duty power tools, making it easier for users to focus on their projects.

In summary, the Chicago Electric 92455 stands out in the realm of tile saws for its powerful motor, water cooling technology, and robust safety features. Its versatility, coupled with ease of use, makes it an excellent choice for anyone tackling tile cutting projects, whether at home or in a professional setting. With this tool, users can expect reliable performance and high-quality results that will elevate their craftsmanship to new heights.
Top Page Image Contents