Chicago Electric 93881 Chemical Precautions, Noise Precautions, Electrical Precautions

Page 6

the Engine and Generator to completely cool. Then, remove the spark plug from the Engine.

2.Do not alter or adjust any part of the Generator or Engine that is assembled and supplied by the manufacturer.

3.Always follow and complete scheduled Generator and Engine maintenance.

CHEMICAL PRECAUTIONS

1.Avoid contact with hot fuel, oil, exhaust fumes, and solid surfaces.

2.Avoid body contact with fuels, oils, and lubricants used in the Generator and Engine. If swallowed, seek medical treatment immediately. Do not induce vomiting if fuel is swallowed. For skin contact, immediately wash with soap and water. For eye contact, immediately flush eyes with clean water.

NOISE PRECAUTIONS

1.Prolonged exposure to high noise levels is hazardous to hearing. Always wear ANSI approved hearing protection when operating or working around the Generator when it is running.

ELECTRICAL PRECAUTIONS

1.All connections and conduits from the Generator to the load must only be installed by trained and licensed electricians, and in compliance with all relevant local, state, and federal electrical codes and standards, and other regulations where applicable.

2.The Generator must be earth-grounded in accordance with all relevant electrical codes and standards before operation.

®

3. If an extension cord (not included) is used, make sure to use only UL listed cords having the correct gauge and length. (See Figure A, next page.)

4. Do not attempt to connect or disconnect load connections while standing in water, or on wet or soggy ground.

5. Do not touch electrically energized parts of the Generator and interconnecting cables or conductors with any part of the body, or with any non-insulated

conductive object.

SKU 93881

For technical questions, please call 1-800-444-3353

PAGE 6

Image 6
Contents Your Warranty Is Voided If GeneratorSave this Manual Product SpecificationsGeneral Safety Rules and Precautions Work AreaPersonal Safety Specific Safety Rules and Precautions ServiceFire and Explosion Precautions Mechanical PrecautionsUse only Engine manufacturer recommended fuel and oil Chemical Precautions Noise PrecautionsElectrical Precautions MISC. Precautions Figure aTo Add Engine Oil Assembly InstructionsUnpacking See Figure BInstallation To Fill The Fuel TankSee Figure C General Location Grounding The GeneratorSee Figure D Product Features See Figure EOperating Instructions To Start The Engine/Generator Figure FTo Connect Electrical Loads Volts x AMP = Watts example 120 volts x 3 AMPs = 360 WattsINSPECTION, MAINTENANCE, and Cleaning See Figure GDo not use damaged equipment Troubleshooting Please Read the Following CarefullyParts List & Assembly Diagram Control Panel Description QtyParts List & Assembly Diagram Generator Assy 13A 12A 11A 10A 8AParts List & Assembly Diagram BODY/FUEL Tank Assy Generator