Chicago Electric 66619 manual Figure F, SKU For technical questions, please call

Page 11

in the “RUN” position when starting a warm Engine. (See Figure E.)

FIGURE F

“ON”

 

POWER

SWITCH

3.Then turn the Engine Power Switch to its “ON” position. (See Figure F.)

RECOIL

FIGURE G

STARTER

HANDLE

 

(42)

 

4.Grasp the Recoil Starter Handle (42) and pull slowly until resistance is felt. While holding the Handle, allow the Starter Rope to rewind slowly. Then, pull the Starter Handle with a rapid, full arm stroke. Once again while holding the Handle, allow the Rope to rewind slowly. Repeat as necessary, until the Engine starts. (See Figure G.)

FIGURE H

CHOKE

 

LEVER

 

(82)

“RUN”

“CHOKE”

5.After the Engine starts and warms up, slowly move the Choke Lever (82) to its “RUN” position. (See Figure H.)

6.IMPORTANT: Allow the Engine to run at no load until warm (approx. 3 minutes) after each start-up to allow the Engine to stabilize.

Break-in Period:

1.Breaking-in the Engine will help to ensure proper equipment and Engine operation, and will extend the Engine’s lifespan. The warranty is void if the Engine is not broken in properly. The first 25 hours of operation is the break-in period.

•During this time frame, DO NOT exceed 75% of the Generator’s load limit. In other words, the maximum load during this break-in period should be no more than 600 watts.

•After the first 25 hours of use:

•Change the unleaded gasoline/2-cycle oil fuel mixture.

Under normal operating conditions subsequent maintenance follows the schedule explained in the Maintenance and Servicing section.

SKU 66619

For technical questions, please call 1-800-444-3353.

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Portable Generator For technical questions or replacement parts, please callContents Save This Manual Set up precautionsCarbon Monoxide Hazard Using a generator indoors Operating precautionsService precautions For technical questions, please call Set Up Generator PrecautionsUnpacking Basic SpecificationsSee Figure B This Unit can Power Following ItemsOperating Instructions Starting the EngineSee Figures B and C See Figure C Start Procedure Before starting the EngineSee Figure C SKU For technical questions, please call Figure FEquipment Operation See Figure Calculating Power DrawSee Figure L Figure LServicing SpecificationsMaintenance Procedures Every 25 Operation Hours Thereafter Cleaning, Maintenance, Lubrication Schedule EngineAfter Initial 25 Operation Hours Before Every Use Maintenance and Cleaning Schedule GeneratorStorage Start Troubleshooting EngineProblem Possible Causes Probable Solutions Engine will not Engine knocks Problem Possible Causes Probable Solutions Engine misfiresEngine stops SuddenlyTroubleshooting Generator Unit Part Description Qty Parts ListAssembly Diagram Assembly Diagram Wiring Diagram Emission Control System Warranty Limited 1 year / 90 Day WarrantyRecord Product’s Serial Number Here Please Read Following Carefully

66619 specifications

The Chicago Electric 66619 is a versatile and highly sought-after tool in the world of woodworking and crafting. Known for its reliability and robust features, this model has gained a reputation among both amateur DIYers and seasoned professionals. One of the standout characteristics of the 66619 is its seamless integration of power and precision, making it efficient for a wide range of applications.

At the core of the Chicago Electric 66619 is its powerful motor, which delivers significant torque to handle demanding tasks. This tool provides consistent performance, allowing users to tackle everything from basic cuts to more intricate designs with ease. The motor's design also ensures that it runs cool, extending the tool's lifespan and maintaining efficiency even during prolonged use.

One of the key features of the Chicago Electric 66619 is its adjustable speed settings. This allows users to customize the cutting speed based on the material being utilized. Whether working with hardwood, softwood, or composite materials, the ability to adjust speed enhances control, resulting in cleaner cuts and reduced risk of splintering.

Another prominent feature is the precision cutting guide, which aids in achieving straight and accurate cuts. This feature is particularly useful for projects requiring intricate details or complex angles, emphasizing the tool's suitability for fine woodworking and cabinetry work. The built-in laser guide further enhances precision, ensuring that users can align their cuts with extreme accuracy.

Portability is also a significant advantage of the Chicago Electric 66619. Its lightweight design and compact form make it easy to transport between job sites or around the home. Users appreciate this mobility, as it allows for greater flexibility when tackling projects in different locations.

Durability is a hallmark of the Chicago Electric brand, and the 66619 is no exception. Constructed with high-quality materials, it is built to withstand the rigors of continuous use while delivering consistent results. Additionally, user-friendly safety features, such as a blade guard and ergonomic handles, contribute to a safe working environment, making it suitable for users of all skill levels.

In conclusion, the Chicago Electric 66619 stands out as a reliable tool for anyone invested in woodworking. With its powerful motor, adjustable speed settings, precision cutting capabilities, portability, and durability, it equips users with everything they need to complete their projects successfully. Whether for professional tasks or hobbyist endeavors, the 66619 remains a valuable addition to any tool collection.
Top Page Image Contents