...............ASSEMBLY .............
TO INSTALL SHIFTER LEVER KNOB
•Thread the shifter lever knob onto the threaded end ol the shilter lever until it is snug against the hex nut and the lip is pointed toward the engine Tighten the hex nut against the botlom o! the shift lever knob (See Fig 6)
SHIFTER KNOB
""_"_'\ __H | EX N UT |
HEX
_._.LEVER
F,GI'6"'
TO CHECKJADJUST CLUTCH
CONTROL CABLES
The control cables, Fig. 7, attached to the auger clutch lever and traction clutch lever may need to be adjusted belore you use your snow thrower
For instructions on checking or adjusting the control cables, see ToAdjust Clutch Control Cables paragraph on page 18
TRACTION CLUTCH LEVER | AUGER | CLUTCH | LEVER | |
OFF | __ |
|
| FF |
I | I,ft- |
| _ ]] | ] |
|
| , |
| ON |
CONTROL CABLES
FIG.7