Poulan 96198002500, 424549 owner manual Maintenance

Page 13

MAINTENANCE

GENERAL RECOMMENDATIONS

The warranty on this snow thrower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain snow thrower as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your snow thrower. All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year, you should replace the spark plug and check belts for wear. A new spark plug will help your engine run better and last longer.

•Follow the maintenance schedule in this manual.

NOTE: Use only Original Equipment Manufacturer (OEM) parts to service this unit. Failure to do so can cause the unit to malfunction and pose a risk of injury to the operator.

LUBRICATION CHART

SAE 5W-30 Motor Oil

See “ENGINE”

in Maintenance section

General

Purpose

Grease

Pivot points

BEFORE EACH USE

1.Check engine oil level.

2.Check for loose fasteners.

3.Check controls to be sure they are functioning properly.

LUBRICATION

Keep your snow thrower well lubricated (See “LUBRICATION CHART”).

SNOW THROWER

Always observe the safety rules when performing any maintenance.

TIRES

•Maintain proper air pressure in both tires (14–17 P.S.I. / 19-24.5 N-m).

•Keeptiresfreeofgasolineandoil,whichcanharmrubber.

NOTE: To seal tire punctures and prevent flat tires due

 

to slow leaks, tire sealant may be purchased from your

 

local parts dealer. Tire sealant also prevents tire dry rot

13

and corrosion.

Engine oil

BELTS

Check belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See “TO REMOVE BELT COVER” in the Service and Adjustments section of this manual).

The belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer. Using other than OEM belts can cause personal injury or damage to the snow thrower.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents HOW to SET UP Your Snow Thrower Assembly / PRE-OPERATIONParts Packed Separately in Carton Remove Snow Thrower from CartonInstall Traction Drive Control ROD See Figs Install Speed Control ROD See FigsUnfold Upper Handle Install Discharge Chute / Chute Rotator Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Know Your Snow Thrower OperationPrimer Ignition KEYDrive speed control lever used to select forward or Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerTo Throw Snow See Fig Using the CLEAN-OUT Tool See FigTo Move Forward and Backward See Fig To Start Engine Before Starting the EngineBefore Stopping Snow Throwing TipsIf Recoil Starter has Frozen Maintenance Engine CleaningTo Adjust Snow Thrower Height Service and AdjustmentsChute Deflector Frame Auger Assembly Housing Handles Carburetor StorageEngine Speed Fuel SystemCylinder OtherTroubleshooting KEY Part Description Auger Housing / Impeller AssemblyAuger 27 RH Auger 27 LHSkid Plate LH Skid Plate RHExploded 178675X008 Corner Bracket Clean OUT Tool Gearbox AssemblyBearing Impeller PulleyControl Panel / Discharge Chute Cable Assembly LEVER/CABLE Rotator AssemblyRotator Head Rotator Pivot BracketHandles 01.08.004-B Control Lever LH Control PanelSpacer RetainerCarriage Bolt 5/16−18 X 155377 NUT 5/16−18 169675 Drive Drive Plate Assembly Speed Selector AssemblyShoulder Screw END PlateRoll PIN 3/16 Axle ShaftSprocket Clik PINENGINE, TEC Chassis / Engine / PulleysFrame Engine Mount PlateTraction Belt Belt CoverImpeller Belt Wheels Wheel Assembly LH187833X421 187865X421BAG of Parts Safety Ignition KEY35062 181037 DecalsDECAL, Danger DECAL, DANGER, DeflectorService Notes Service Notes Limited Warranty

96198002500, 424549 specifications

The Poulan 424549,96198002500 is a versatile and reliable tool designed for outdoor maintenance and gardening tasks. This model stands out for its combination of robust performance and user-friendly features, making it an exceptional choice for both amateur gardeners and professional landscapers.

One of the main features of the Poulan 424549 is its powerful engine. It is equipped with a reliable two-cycle engine that provides ample power to tackle a variety of tasks. This engine design not only enhances performance but also ensures efficient fuel consumption, allowing users to work longer without the need for frequent refueling.

The lightweight design of the Poulan 424549 adds to its usability. Weighing significantly less than many competitors, this model allows for easy maneuverability, reducing user fatigue during extended periods of operation. The ergonomically designed handle also contributes to user comfort, providing a secure grip and minimizing vibration, which is crucial during longer work sessions.

Another notable feature is its advanced cutting technology. The Poulan 424549 integrates a sharp, durable cutting blade that is designed to slice through grass, weeds, and light brush with ease. This blade is not only effective but also designed for easy maintenance, allowing users to keep it in optimal condition with minimal effort.

Furthermore, the Poulan 424549 boasts a simplified starting system, which is an essential characteristic for users who value convenience. This system allows for quick and hassle-free starts, eliminating the frustration that often accompanies starting outdoor power equipment.

Durability is also a key focus in the design of the Poulan 424549. Constructed with high-quality materials, this model is built to withstand the rigors of outdoor use. Whether facing rough terrain or adverse weather conditions, users can rely on the Poulan 424549 to perform consistently.

Lastly, the Poulan 424549 comes with user-friendly maintenance features. Its easy-access air filter and spark plug make routine maintenance tasks straightforward, ensuring that users can keep the tool in excellent working condition without unnecessary complexity.

Overall, the Poulan 424549,96198002500 is an exceptional choice for those seeking a reliable, powerful, and user-friendly outdoor tool. With its robust engine, ergonomic design, advanced cutting technology, and emphasis on durability, it provides everything needed to maintain gardens and yards effectively.
Top Page Image Contents