Poulan 424549, 96198002500 owner manual Safe Operation Practices for Walk-Behind Snow Throwers

Page 2

IMPORTANT

Safe Operation Practices for Walk-Behind Snow Throwers

This snow thrower is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

WARNING: Always Remove safety igni- tion key and disconnect spark plug wire and place it where it cannot contact plug in order to prevent accidental starting when setting up, transporting, adjusting or making repairs.

WARNING: This snow thrower is for use on sidewalks, driveways and other ground level surfaces. Caution should be exercised while using on sloping sur- faces. Do not use snow thrower on surfaces above ground level such as roofs of residences, garages, porches or other such structures or buildings.

Training

1.Read, understand and follow all instructions on the machine and in the manual(s) before operating this unit. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

2.Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

3.Keep the area of operation clear of all persons, par- ticularly small children.

4.Exercise caution to avoid slipping or falling, especially when operating the snow thrower in reverse.

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas.

WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemi- cals known to the State of California to cause cancer and birth defects or other reproductive harm.

(f)Keep the nozzle in contact with the rim of the fuel tank or container opening at all times, until refuel- ing is complete. Do not use a nozzle lock-open device.

(g)Replace gasoline cap securely and wipe up spilled fuel.

(h)If fuel is spilled on clothing, change clothing im- mediately.

5.Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

6.Adjust the collector housing height to clear gravel or crushed rock surface.

Preparation

1. Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, and other foreign objects.

2. Disengage all clutches and shift into neutral before starting the engine (motor).

3. Do not operate the equipment without wearing adequate winter garments. Avoid loose fitting clothing that can get caught in moving parts. Wear footwear that will improve footing on slippery surfaces.

4. Handle fuel with care; it is highly flammable

(a) Use an approved fuel container.

(b) Never add fuel to a running engine or hot en- gine.

(c) Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

(d) Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground, away from your vehicle, before filling.

(e) When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

2

7.Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by manufacturer).

8.Always wear safety glasses or eye shields during op- eration or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the machine.

Operation

1.Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

2.Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.

3.After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, disconnect the cord on electric motors, thoroughly inspect the snow thrower for any damage, and repair the damage before restarting and operating the snow thrower.

4.If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

5.Stop the engine (motor) whenever you leave the oper- ating position, before unclogging the collector/impeller housing or discharge chute, and when making any repairs, adjustments or inspections.

Image 2
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonUnfold Upper Handle Install Speed Control ROD See FigsInstall Traction Drive Control ROD See Figs Check Tire Pressure Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotator Head See Fig Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Drive speed control lever used to select forward orHOW to USE Your Snow Thrower StoppingTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigTo Throw Snow See Fig Before Starting the Engine To Start EngineIf Recoil Starter has Frozen Snow Throwing TipsBefore Stopping Maintenance Cleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Frame Auger Assembly Housing Handles Engine Speed StorageCarburetor Fuel SystemOther CylinderTroubleshooting Auger Housing / Impeller Assembly KEY Part DescriptionSkid Plate LH Auger 27 LHAuger 27 RH Skid Plate RHExploded Bearing Gearbox Assembly178675X008 Corner Bracket Clean OUT Tool Impeller PulleyControl Panel / Discharge Chute Rotator Head LEVER/CABLE Rotator AssemblyCable Assembly Rotator Pivot BracketHandles 01.08.004-B Spacer Control PanelControl Lever LH RetainerCarriage Bolt 5/16−18 X 155377 NUT 5/16−18 169675 Drive Shoulder Screw Speed Selector AssemblyDrive Plate Assembly END PlateSprocket Axle ShaftRoll PIN 3/16 Clik PINFrame Chassis / Engine / PulleysENGINE, TEC Engine Mount PlateImpeller Belt Belt CoverTraction Belt 187833X421 Wheel Assembly LHWheels 187865X42135062 Safety Ignition KEYBAG of Parts DECAL, Danger Decals181037 DECAL, DANGER, DeflectorService Notes Service Notes Limited Warranty

96198002500, 424549 specifications

The Poulan 424549,96198002500 is a versatile and reliable tool designed for outdoor maintenance and gardening tasks. This model stands out for its combination of robust performance and user-friendly features, making it an exceptional choice for both amateur gardeners and professional landscapers.

One of the main features of the Poulan 424549 is its powerful engine. It is equipped with a reliable two-cycle engine that provides ample power to tackle a variety of tasks. This engine design not only enhances performance but also ensures efficient fuel consumption, allowing users to work longer without the need for frequent refueling.

The lightweight design of the Poulan 424549 adds to its usability. Weighing significantly less than many competitors, this model allows for easy maneuverability, reducing user fatigue during extended periods of operation. The ergonomically designed handle also contributes to user comfort, providing a secure grip and minimizing vibration, which is crucial during longer work sessions.

Another notable feature is its advanced cutting technology. The Poulan 424549 integrates a sharp, durable cutting blade that is designed to slice through grass, weeds, and light brush with ease. This blade is not only effective but also designed for easy maintenance, allowing users to keep it in optimal condition with minimal effort.

Furthermore, the Poulan 424549 boasts a simplified starting system, which is an essential characteristic for users who value convenience. This system allows for quick and hassle-free starts, eliminating the frustration that often accompanies starting outdoor power equipment.

Durability is also a key focus in the design of the Poulan 424549. Constructed with high-quality materials, this model is built to withstand the rigors of outdoor use. Whether facing rough terrain or adverse weather conditions, users can rely on the Poulan 424549 to perform consistently.

Lastly, the Poulan 424549 comes with user-friendly maintenance features. Its easy-access air filter and spark plug make routine maintenance tasks straightforward, ensuring that users can keep the tool in excellent working condition without unnecessary complexity.

Overall, the Poulan 424549,96198002500 is an exceptional choice for those seeking a reliable, powerful, and user-friendly outdoor tool. With its robust engine, ergonomic design, advanced cutting technology, and emphasis on durability, it provides everything needed to maintain gardens and yards effectively.