Poulan 96198002500, 424549 owner manual Unfold Upper Handle, Install Speed Control ROD See Figs

Page 5

ASSEMBLY / PRE-OPERATION

NOTE: The multi-wrench may be used for assembly of the chute rotator head to snow thrower and making adjustments to the skid plates.

UNFOLD UPPER HANDLE

1.Raise upper handle to the operating position and tighten handle knobs securely. Additional carriage bolts, washers and handle knobs are in bag of parts. Use to secure upper handle to lower handle. Install in lower holes in handles.

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)

1.Remove plastic tie securing rod to lower handle.

2.Insert rod into speed control bracket and secure with retainer spring.

SPEED

CONTROL

ROD

PLASTIC TIE

UPPER

HANDLE

HANDLE

KNOB

LOWER

HANDLE

FIG. 1

SPEED CONTROL ROD

 

RETAINER

 

SPRING

SPEED

SPEED

CONTROL

CONTROL

BRACKET

LEVER

FIG. 2

INSTALL TRACTION DRIVE CONTROL ROD (See Figs. 3 and 4)

The traction drive control rod has the long loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into pivot bracket with loop opening down as shown.

2.With top end of rod positioned under left side of control panel, push rod down and insert top end of rod into hole in drive control bracket. Secure with retainer spring.

TRACTION DRIVE

CONTROL ROD

RUBBER

SLEEVE

LOOP OPEN-

ING DOWN

PIVOT

BRACKET

FIG. 3

TRACTION DRIVE

RETAINER

CONTROL LEVER

SPRING

 

TRACTION

 

DRIVE

 

CONTROL

 

ROD

DRIVE

 

CONTROL

 

BRACKET

 

FIG. 4

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents HOW to SET UP Your Snow Thrower Assembly / PRE-OPERATIONParts Packed Separately in Carton Remove Snow Thrower from CartonUnfold Upper Handle Install Speed Control ROD See FigsInstall Traction Drive Control ROD See Figs Check Tire Pressure Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotator Head See Fig Know Your Snow Thrower OperationPrimer Ignition KEYDrive speed control lever used to select forward or Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigTo Throw Snow See Fig To Start Engine Before Starting the EngineIf Recoil Starter has Frozen Snow Throwing TipsBefore Stopping Maintenance Engine CleaningChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Frame Auger Assembly Housing Handles Carburetor StorageEngine Speed Fuel SystemCylinder OtherTroubleshooting KEY Part Description Auger Housing / Impeller AssemblyAuger 27 RH Auger 27 LHSkid Plate LH Skid Plate RHExploded 178675X008 Corner Bracket Clean OUT Tool Gearbox AssemblyBearing Impeller PulleyControl Panel / Discharge Chute Cable Assembly LEVER/CABLE Rotator AssemblyRotator Head Rotator Pivot BracketHandles 01.08.004-B Control Lever LH Control PanelSpacer RetainerCarriage Bolt 5/16−18 X 155377 NUT 5/16−18 169675 Drive Drive Plate Assembly Speed Selector AssemblyShoulder Screw END PlateRoll PIN 3/16 Axle ShaftSprocket Clik PINENGINE, TEC Chassis / Engine / PulleysFrame Engine Mount PlateImpeller Belt Belt CoverTraction Belt Wheels Wheel Assembly LH187833X421 187865X42135062 Safety Ignition KEYBAG of Parts 181037 DecalsDECAL, Danger DECAL, DANGER, DeflectorService Notes Service Notes Limited Warranty

96198002500, 424549 specifications

The Poulan 424549,96198002500 is a versatile and reliable tool designed for outdoor maintenance and gardening tasks. This model stands out for its combination of robust performance and user-friendly features, making it an exceptional choice for both amateur gardeners and professional landscapers.

One of the main features of the Poulan 424549 is its powerful engine. It is equipped with a reliable two-cycle engine that provides ample power to tackle a variety of tasks. This engine design not only enhances performance but also ensures efficient fuel consumption, allowing users to work longer without the need for frequent refueling.

The lightweight design of the Poulan 424549 adds to its usability. Weighing significantly less than many competitors, this model allows for easy maneuverability, reducing user fatigue during extended periods of operation. The ergonomically designed handle also contributes to user comfort, providing a secure grip and minimizing vibration, which is crucial during longer work sessions.

Another notable feature is its advanced cutting technology. The Poulan 424549 integrates a sharp, durable cutting blade that is designed to slice through grass, weeds, and light brush with ease. This blade is not only effective but also designed for easy maintenance, allowing users to keep it in optimal condition with minimal effort.

Furthermore, the Poulan 424549 boasts a simplified starting system, which is an essential characteristic for users who value convenience. This system allows for quick and hassle-free starts, eliminating the frustration that often accompanies starting outdoor power equipment.

Durability is also a key focus in the design of the Poulan 424549. Constructed with high-quality materials, this model is built to withstand the rigors of outdoor use. Whether facing rough terrain or adverse weather conditions, users can rely on the Poulan 424549 to perform consistently.

Lastly, the Poulan 424549 comes with user-friendly maintenance features. Its easy-access air filter and spark plug make routine maintenance tasks straightforward, ensuring that users can keep the tool in excellent working condition without unnecessary complexity.

Overall, the Poulan 424549,96198002500 is an exceptional choice for those seeking a reliable, powerful, and user-friendly outdoor tool. With its robust engine, ergonomic design, advanced cutting technology, and emphasis on durability, it provides everything needed to maintain gardens and yards effectively.
Top Page Image Contents