MTD E662H, E664F, E6A4E, E644E, E642E manual Important Safe Operation Practices, Training, Preparation

Page 2

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE YOUR SNOW THROWER. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. WHEN YOU SEE THIS SYMBOL-HEED ITS WARNING.

WARNING: The Engine Exhaust from this product contains chemicals known

to the State of California to cause cancer, birth defects or other reproductive harm.

DANGER: Your snow thrower was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. If you violate any of these rules, you may cause serious injury to yourself or others.

1. TRAINING

Read this operator's manual carefully in its entirety before attempting to assemble or operate this machine. Be completely familiar with the controls and the proper use of this machine before operating it. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

Never allow children under 14 years old to operate a snow thrower. Children 14 years old and over should only operate snow thrower under close parental supervision. Only persons well acquainted with these rules of safe operation should be allowed to use your snow thrower.

No one should operate this unit while intoxicated or while taking medication that impairs the senses or reactions.

Keep the area of operation clear of all persons, especially small children and pets.

Exercise caution to avoid slipping or falling, especially when operating in reverse.

2.PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all door mats, sleds, boards, wires and other foreign objects.

Disengage all clutches and shift into neutral before starting engine.

Do not operate equipment without wearing adequate winter outer garments. Do not wear jewelry, long scarfs or other loose clothing which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces.

Before working with gasoline, extinguish all cigarettes and other sources of ignition. Check the fuel before starting the engine. Gasoline is an extremely flammable fuel. Do not fill the gasoline tank indoors, while the engine is running, or until engine has been allowed to cool at least two minutes. Replace gasoline cap securely and wipe off any spilled gasoline before starting the engine as it may cause a fire or explosion.

Use a grounded three wire plug-in for all units with electric drive motors or electric starting motors.

Adjust collector housing height to clear gravel or crushed rock surface.

Never attempt to make any adjustments while engine is running (except where specifically recommended by manufacturer).

Let engine and machine adjust to outdoor temperature before starting to clear snow.

Always wear safety glasses or eye shields during operation or while performing an adjustment or repair, to protect eyes from foreign objects that may be thrown from the machine in any direction.

3.OPERATION

Do not put hands or feet near or under rotating parts. Keep clear of discharge opening and auger at all times.

Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine, remove wire from spark plug, and thoroughly inspect the snow thrower for any damage. Repair the damage before restarting and operating the snow thrower.

2

Image 2
Contents Important Read Safety Rules and Instructions Carefully MTD Products INC. P.O. BOX 368022 CLEVELAND, OhioPreparation Important Safe Operation PracticesTraining OperationMaintenance and Storage Finding Your Model Number Calling Customer SupportContents of Hardware Pack Tools Required Assembly InstructionsUnpacking Triangle Metal Tab Attaching Shift ROD Hardware DHardware B Attaching the Chute AssemblyAttaching Clutch Cables Attaching the Chute Crank Hardware CTraction Drive Clutch and Shift Lever Adjustment Lamp Wiring If EquippedFinal Adjustments Auger Drive ClutchControls GAS and OIL FILL-UP OperationBefore Starting To Start EngineElectric Starter Recoil StarterTo Stop Engine Adjustments Carburetor Adjustment Adjusting Auger ClutchAdjusting Shift ROD Drive WheelsMaintenance LubricationAuger Belts Drive BeltOFF-SEASON Storage Changing the Friction Wheel RubberTrouble Shooting Guide Trouble Possible Causes Corrective ActionGear Assembly Blower Housing Blower Housing Handle Assembly Handle Assembly Frame Assembly Size Engine and V-Belts E642E, E644E, E664F E6A4E, E662H Page Page MANUFACTURER’S Limited Warranty

E642E, E644E, E662H, E6A4E, E664F specifications

The MTD E664F, E6A4E, E642E, E644E, and E662H are innovative models within the MTD lineup, showcasing cutting-edge features and advanced technologies designed to provide optimal performance and versatility for various applications.

The MTD E664F stands out with its robust build and powerful engine, making it a reliable choice for commercial and heavy-duty tasks. It incorporates a user-friendly control system, enhancing the operator experience and ensuring precise handling. Its high-capacity fuel tank allows for longer work intervals, reducing downtime and increasing productivity.

Meanwhile, the MTD E6A4E model is tailored for efficiency and ease of use. This unit features a compact design, making it ideal for urban environments or smaller workspaces. Its lightweight construction facilitates effortless maneuverability, while the advanced cutting technology ensures a clean and even finish. Users will appreciate the minimal maintenance requirements, further adding to its appeal.

The MTD E642E combines power with versatility. Equipped with a range of adaptable attachments, this model is suitable for multiple applications, from landscaping to snow removal. Its durable chassis and high-torque engine deliver superior performance under varying conditions. Additionally, the model’s ergonomic design ensures operator comfort during extended use, making it a favorite among professionals.

Similar to the E642E, the MTD E644E focuses on flexibility but enhances it with smart technology integration. Featuring an intuitive interface and connectivity options, operators can monitor and manage operations remotely. This connectivity maximizes uptime through predictive maintenance alerts and efficiency tracking.

Lastly, the MTD E662H is a high-performance model that is engineered for heavy-duty applications. Its powerful engine is paired with advanced transmission technology, ensuring smooth operation even under the most demanding conditions. The fully adjustable settings allow operators to customize performance to meet specific requirements, while the rugged construction promises longevity and reliability.

These models collectively embody MTD’s commitment to innovation and quality, offering various features, including durability, adaptability, and user-focused design. Whether for professional landscaping, agriculture, or maintenance tasks, the MTD E664F, E6A4E, E642E, E644E, and E662H provide a comprehensive range of solutions tailored to meet the needs of today’s operators, reinforcing MTD’s reputation in the market.