MTD E642E, E664F, E6A4E, E662H Attaching Clutch Cables, Attaching the Chute Assembly, Hardware B

Page 9

ATTACHING CLUTCH CABLES

(Hardware D)

1.Thread the hex jam nuts all the way up the threaded portion of the “Z” ends.

2.Make certain all cables are in the grooves of the cable roller guides. The roller guides are located in the lower rear of the unit. Lift the clutch grip in the raised (up) position.

3.Thread the cable onto the threaded portion of the “Z” end until there is no slack in the cable, but the cable is NOT tight. Do not overtighten cable. See Figure 13.

WARNING: If cable is tightened so there is tension on the cable with the clutch grip released, the safety features of the snow thrower may be overridden.

“Z” End

Hex Jam

Nut

Cable is

Straight

Figure 13

4.When correct adjustment is reached, tighten the hex nut against the cable to lock it in position.

ATTACHING THE CHUTE ASSEMBLY

(Hardware B)

1.Place chute assembly over chute opening, with the opening in the chute assembly facing the front of the unit.

2.Place chute flange keepers beneath lip of chute assembly, flat side down.

3.Insert hex bolt up through chute flange keeper and chute assembly as shown in Figure 14. Secure with hex lock nut.

4.After assembling all three chute flange keepers, tighten all nuts and bolts securely, then back off 1/4 turn to allow easier movement.

Chute

Assembly

Hex Bolt

Hex Lock Nut

Chute Flange

Keeper

Figure 14

ATTACHING THE CHUTE CRANK (Hardware C)

1.Insert hex bolt through the upper chute crank bracket (located on the chute crank).

See Figure 15.

Lock Washer

Hex Nut

Hex Bolt

Upper Chute

Crank Bracket

Figure 15

2.Place the hex bolt into the hole provided in the left handle. Secure with lock washer and hex nut. Do not tighten at this point.

3.Loosen the carriage bolts and hex lock nuts which secure the lower chute crank bracket to the extension on the left side of the chute assembly. See Figure 16.

Carriage Bolts

Hex Lock Nuts

Lower

Chute

Crank

Bracket

Figure 16

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents MTD Products INC. P.O. BOX 368022 CLEVELAND, Ohio Important Read Safety Rules and Instructions CarefullyTraining Important Safe Operation PracticesPreparation OperationMaintenance and Storage Calling Customer Support Finding Your Model NumberContents of Hardware Pack Assembly Instructions UnpackingTools Required Triangle Metal Tab Hardware D Attaching Shift RODAttaching Clutch Cables Attaching the Chute AssemblyHardware B Attaching the Chute Crank Hardware CFinal Adjustments Lamp Wiring If EquippedTraction Drive Clutch and Shift Lever Adjustment Auger Drive ClutchControls Before Starting OperationGAS and OIL FILL-UP To Start EngineRecoil Starter To Stop EngineElectric Starter Adjustments Adjusting Shift ROD Adjusting Auger ClutchCarburetor Adjustment Drive WheelsLubrication MaintenanceDrive Belt Auger BeltsChanging the Friction Wheel Rubber OFF-SEASON StorageTrouble Possible Causes Corrective Action Trouble Shooting GuideGear Assembly Blower Housing Blower Housing Handle Assembly Handle Assembly Frame Assembly Size Engine and V-Belts E642E, E644E, E664F E6A4E, E662H Page Page MANUFACTURER’S Limited Warranty

E642E, E644E, E662H, E6A4E, E664F specifications

The MTD E664F, E6A4E, E642E, E644E, and E662H are innovative models within the MTD lineup, showcasing cutting-edge features and advanced technologies designed to provide optimal performance and versatility for various applications.

The MTD E664F stands out with its robust build and powerful engine, making it a reliable choice for commercial and heavy-duty tasks. It incorporates a user-friendly control system, enhancing the operator experience and ensuring precise handling. Its high-capacity fuel tank allows for longer work intervals, reducing downtime and increasing productivity.

Meanwhile, the MTD E6A4E model is tailored for efficiency and ease of use. This unit features a compact design, making it ideal for urban environments or smaller workspaces. Its lightweight construction facilitates effortless maneuverability, while the advanced cutting technology ensures a clean and even finish. Users will appreciate the minimal maintenance requirements, further adding to its appeal.

The MTD E642E combines power with versatility. Equipped with a range of adaptable attachments, this model is suitable for multiple applications, from landscaping to snow removal. Its durable chassis and high-torque engine deliver superior performance under varying conditions. Additionally, the model’s ergonomic design ensures operator comfort during extended use, making it a favorite among professionals.

Similar to the E642E, the MTD E644E focuses on flexibility but enhances it with smart technology integration. Featuring an intuitive interface and connectivity options, operators can monitor and manage operations remotely. This connectivity maximizes uptime through predictive maintenance alerts and efficiency tracking.

Lastly, the MTD E662H is a high-performance model that is engineered for heavy-duty applications. Its powerful engine is paired with advanced transmission technology, ensuring smooth operation even under the most demanding conditions. The fully adjustable settings allow operators to customize performance to meet specific requirements, while the rugged construction promises longevity and reliability.

These models collectively embody MTD’s commitment to innovation and quality, offering various features, including durability, adaptability, and user-focused design. Whether for professional landscaping, agriculture, or maintenance tasks, the MTD E664F, E6A4E, E642E, E644E, and E662H provide a comprehensive range of solutions tailored to meet the needs of today’s operators, reinforcing MTD’s reputation in the market.
Top Page Image Contents