POWER SUPPLY___________________________________

DC IN 6V

SW EXT. ANT.

DX. /

 

 

LQ.

 

STEREO/MONO

Battery operation

1Open the battery compartment on the back of the device by pressing the marking and opening the lid.

2Insert the batteries (4 x 1.5 V, Mignon type LR6/AM3/AA).

Notes:

When the batteries are low, » « flashes in the display. Each time you switch off the radio, the battery charge indicator, for example »3«, appears for seven seconds. If the charge level falls below »2«, you must change the batteries. Put in the new batteries within 3 minutes, otherwise all stored settings will be lost.

Take out the batteries when you know that the device will not be used for a long period of time. The manufacturer accepts no liability for damage resulting from used batteries.

Environmental note:

Batteries, including those which contain no heavy metal, may not be disposed of with household waste. Please dispose of used batteries in an environmentally sound manner. Find out about the legal regulations which apply in your area.

Mains operation (with standard 6 V/200 mA mains adapter)

Check if the mains voltage on the mains adapter type plate corresponds to your local mains supply. The only way to disconnect the device from the mains supply is to unplug the adapter.

1Plug the mains adapter cable into the »DC 6 V Ó« socket on the left of the device.

2Insert the mains adapter plug in the socket.

– The batteries in the compartment are switched off.

26

Page 8
Image 8
Grundig WR 5408 PLL manual Battery operation, Mains operation with standard 6 V/200 mA mains adapter, Power Supply