Storing short wave SW stations | Grundig WR 5408 PLL instruction

SETTINGS___________________________________________________

2Press »MEMO AM/PM«.

–Display: » M 1 « and the preset number, for example » « flash.

3Press » FREQ./CLOCK« to store the radio station.

–Display: the frequency and » «.

–The current radio station is stored on preset position 1.

Storing short wave (SW) stations

The short wave band is divided into frequency bands of different lengths. This means that very many stations and institutions use this wave band for international communication. Therefore, you can store up to 18 SW stations on two memory levels.

1Save short wave stations in the same way as described in the previous section.

2Once you have stored nine stations on one memory level » M 1 «, press »SW PAGE CLOCK 1/2« to switch to the second memory level.

– Display: » M 2 «.

3Store the remaining nine stations as described above.

Note:

If you try to store more than 18 stations and press »MEMO AM/PM«, »FULL« appears in the display.

Automatic station search

This function allows you to automatically search for and store nine stations in each of the FM, MW and LW bands (not SW).

1To start the search, press »« and »« at the same time and hold them down until you hear a signal.

–The search starts at the lowest frequency in the selected wave band, and stores the nine stations with the strongest signals. After the search has finished, a signal sounds and the last station stored can be heard.

–Display: » M 1 « and the preset number, for example » «.

Notes:

When you start the search, all the previously stored stations are deleted. During the search, the status line » ... ... ...« shows the pro- gress, but not the stations found.