Poulan 96192000301, 401214 owner manual Install Auger Control ROD See Figs, Check Tire Pressure

Page 6

ASSEMBLY / PRE-OPERATION

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

The auger control rod has the short loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown.

2.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

RUBBER

SLEEVE

CONTROL

ARM

LOOP

OPENING

UP

FIG. 5

AUGER CONTROL ROD

AUGER

RETAINER

CONTROL

LEVER

SPRING

 

AUGER

CONTROL

BRACKET

FIG. 6

INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotater head over chute bracket. If neces- sary, rotate chute assembly to align square and pin on un- derside of chute rotater head with holes in chute bracket.

3.With chute rotater head and chute bracket aligned, position chute rotater head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATER

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATER HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14–17 PSI.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Install Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting the engineHOW to USE Your Snow Thrower StoppingWhen cleaning, repairing, or inspecting, make When traction drive control lever is engagedUsing the CLEAN-OUT Tool See Fig Stopped. Disconnect the spark plug wireBefore Starting the Engine Scraper BARTo Start Engine Snow Throwing Tips Before StoppingIf Recoil Starter has Frozen Maintenance Cleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector To Remove Wheels See Fig Storage OtherTroubleshooting Service Notes Limited Warranty

401214, 96192000301 specifications

The Poulan 401214,96192000301 is a versatile and efficient chainsaw designed for both professional and home use. Known for its durability and reliability, this model is ideal for a variety of tasks ranging from light trimming to heavy-duty cutting, making it a popular choice among homeowners and landscapers.

One of the most notable features of the Poulan 401214 is its powerful engine. Equipped with a robust two-stroke engine, the chainsaw delivers impressive cutting performance while maintaining fuel efficiency. This not only allows for longer operational time between refueling but also reduces the overall environmental impact. The engine's low-emission design meets stringent EPA standards, making it an eco-friendly choice in the chainsaw market.

Another standout characteristic is its lightweight construction. Weighing in at just under 10 pounds, the Poulan 401214 is designed for ease of handling. The lightweight design helps reduce user fatigue, especially during extended use. This feature is particularly beneficial for homeowners who may find themselves in need of a reliable cutting tool for longer projects.

The chainsaw utilizes a 16-inch bar and chain, allowing it to tackle a wide range of cutting tasks effectively. The length of the bar strikes a balance between agility and cutting capability, making it suitable for pruning branches, felling small trees, and cutting firewood. The chain is designed for easy maintenance and offers tool-less tensioning, so users can quickly adjust the tension as needed without requiring additional tools.

In terms of safety features, the Poulan 401214 is equipped with a chain brake, which is an essential addition for reducing the risk of accidents during operation. The equipped anti-vibration technology significantly minimizes vibrations, providing a more comfortable user experience while enhancing control during use.

In summary, the Poulan 401214,96192000301 chainsaw stands out due to its powerful engine, lightweight design, and user-friendly features. Its combination of performance, safety, and maintenance ease makes it an ideal choice for anyone looking to invest in a high-quality chainsaw that meets a variety of cutting needs. Whether for professional landscaping or home gardening projects, this chainsaw is sure to deliver reliability and efficiency.
Top Page Image Contents