Poulan 199340, 96192000200 owner manual Unfold Upper Handle, Install Speed Control ROD See Figs

Page 5

ASSEMBLY / PRE-OPERATION

NOTE: The multi-wrench may be used for assembly of the chute rotator head to snow thrower and making adjustments to the skid plates.

UNFOLD UPPER HANDLE

1.Raise upper handle to the operating position and tighten handle knobs securely.

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)

1.Remove plastic tie securing rod to lower handle.

2.Insert rod into speed control bracket and secure with retainer spring.

SPEED

CONTROL

ROD

PLASTIC TIE

UPPER

HANDLE

HANDLE

KNOB

LOWER

HANDLE

FIG. 1

SPEED CONTROL ROD

RETAINER

SPRING

SPEEDSPEED

CONTROL CONTROL

BRACKET LEVER

FIG. 2

INSTALL TRACTION DRIVE CONTROL ROD (See Figs. 3 and 4)

The traction drive control rod has the long loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into pivot bracket with loop opening down as shown.

2.With top end of rod positioned under left side of control panel, push rod down and insert top end of rod into hole in drive control bracket. Secure with retainer spring.

TRACTION DRIVE

CONTROL ROD

RUBBER

SLEEVE

LOOP

OPENING

DOWN

PIVOT

BRACKET

FIG. 3

TRACTION DRIVE

RETAINER

CONTROL LEVER

SPRING

TRACTION

DRIVE

CONTROL

ROD

DRIVE

CONTROL

BRACKET

FIG. 4

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Parts Packed Separately in Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Unfold Upper Handle Install Speed Control ROD See FigsInstall Traction Drive Control ROD See Figs Check Tire Pressure Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotater Head See Fig Know Your Snow Thrower OperationRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerUsing the CLEAN-OUT Tool See Fig When traction drive control lever is engagedWhen cleaning, repairing, or inspecting, make Stopped. Disconnect the spark plug wireTo Start Engine Before Starting the EngineScraper BAR If Recoil Starter has Frozen Snow Throwing TipsBefore Stopping Maintenance Engine CleaningChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height To Remove Wheels See Fig Other StorageTroubleshooting Service Notes Limited Warranty

199340, 96192000200 specifications

The Poulan 96192000200, also known as the Poulan Pro 199340, is a powerful and efficient chainsaw designed for both homeowners and professional users. This versatile tool combines performance with user-friendly features, making it an ideal choice for a variety of cutting tasks, including tree pruning, firewood cutting, and general yard maintenance.

One of the standout features of the Poulan 96192000200 is its powerful engine. Equipped with a robust 50cc two-stroke engine, this chainsaw delivers impressive power, allowing users to tackle larger, tougher jobs with ease. The engine is designed to provide reliable and consistent performance, ensuring that it can cut through hardwoods and thicker branches without a hitch.

In addition to its power, the Poulan 96192000200 also incorporates advanced technology aimed at enhancing user experience and safety. The chainsaw features a patented OxyPower technology, which optimizes fuel consumption while minimizing emissions. This not only makes the chainsaw environmentally friendly but also improves its efficiency, allowing for longer run times between refueling.

The chain brake system is another notable characteristic of this model. The chain brake instantly stops the chain when activated, providing added safety for the operator. This feature is especially important during kickback situations, ensuring that users remain protected while operating the saw.

Furthermore, the Poulan 96192000200 is designed with ease of use in mind. It features an adjustable automatic chain oiler, which ensures that the chain receives adequate lubrication during operation, reducing wear and prolonging the life of the chain and bar. The tool-less air filter and spark plug cover also make maintenance a breeze, allowing users to quickly access and clean these components without the need for additional tools.

The ergonomic design of the chainsaw is another highlight. With a lightweight construction and well-placed grip handles, the Poulan 96192000200 minimizes user fatigue during extended use. This makes it suitable for both casual users and professionals who may spend hours operating the tool.

Overall, the Poulan 96192000200, 199340 chainsaw stands out as a reliable, powerful, and user-friendly option for anyone in need of a high-performance cutting tool. With its combination of advanced technology, safety features, and ergonomic design, it’s a strong contender for both residential and commercial applications.
Top Page Image Contents