Poulan 422073, 96192002301 owner manual Table of Contents

Page 3

6.When cleaning, repairing or inspecting the snow thrower, stop the engine and make certain the collector/impel- ler and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent someone from accidentally starting the engine.

7.Do not run the engine indoors, except when starting the engine and for transporting the snow thrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

8.Exercise extreme caution when operating on slopes.

9.Never operate the snow thrower without proper guards, and other safety protective devices in place and work- ing.

10.Never direct the discharge toward people or areas where property damage can occur. Keep children and others away.

11.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

12.Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when operating in reverse.

13.Disengage power to the collector/impeller when snow thrower is transported or not in use.

14.Use only attachments and accessories approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, or cabs).

15.Never operate the snow thrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk; never run.

16.Never touch a hot engine or muffler.

Clearing a Clogged Discharge Chute

Hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snow throwers. Never use your hand to clean out the dis- charge chute. To clear the chute:

1.SHUT THE ENGINE OFF!

2.Wait 10 seconds to be sure the impeller blades have stopped rotating.

3.Always use a clean-out tool, not your hands.

Maintenance and Storage

1.Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

2.Never store the machine with fuel in the fuel tank inside a building where ignition sources are present such as hot water heaters, space heaters, or clothes dryers. Allow the engine to cool before storing in any enclosure.

3.Always refer to operator’s manual for important details if the snow thrower is to be stored for an extended period.

4.Maintain or replace safety and instruction labels, as necessary.

5.Run the machine a few minutes after throwing snow to prevent freeze-up of the collector/impeller.

CONGRATULATIONS on your purchase of a new snow thrower. It has been designed, engineered and manufac- tured to give best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower properly. Always observe the “SAFETY RULES”.

SERIAL NUMBER: ___________________________

DATE OF PURCHASE: _______________________

THE MODEL AND SERIAL NUMBERS WILL BE FOUND ON A DECAL ATTACHED TO THE REAR OF THE SNOW THROWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

PRODUCT SPECIFICATIONS

Gasoline Capacity

4.0 Quarts (3,78 Liters)

and Type:

 

Unleaded Regular only

 

 

Oil Type

SAE 30 (above 40°F)

(API SG–SL):

SAE 5W-30 or 10W-30 (0° to +40°F)

 

SAE 0W-30 (below 0°F)

 

 

Oil Capacity:

21 Ounces (0,6 Liters)

 

 

Spark Plug:

Champion RJ19LM

Gap:

0.030" (0,762 mm)

 

 

 

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your snow thrower.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

TABLE OF CONTENTS

SAFETY RULES

2-3

 

MAINTENANCE

13-14

PRODUCT SPECIFICATIONS

3

 

SERVICE AND ADJUSTMENTS

15-17

CUSTOMER RESPONSIBILITIES

3

 

STORAGE

17

ASSEMBLY / PRE-OPERATION

4-7

 

TROUBLESHOOTING

18

OPERATION

8-12

 

REPAIR PARTS

20-37

MAINTENANCE SCHEDULE

13

3

WARRANTY

BACK COVER

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Parts Packed Separately in CartonUnfold Upper Handle Install Speed Control ROD See FigsInstall Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig To Start Engine Before Starting the EngineSnow Throwing Tips Before StoppingIf Recoil Starter has Frozen Lubrication MaintenanceGeneral Recommendations Before Each USEEngine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Other StorageTroubleshooting Service Notes Exploded KEY Part Description Auger 27 RH Auger HousingScraper BAR Auger 27 LHBearing Plug Auger BearingStrap Chute WeldmentDeflector Weldment Deflector SealPulley Pivot LEVER/CABLE Rotator AssemblyRotator Head Rotator Pivot BracketLoop Handle LH Loop Handle RH405784X479 Pivot Support Weldment Handle Knob SpacerRetainer Knob REDShifter ROD Bottom Impeller ROD AssemblyTraction ROD Assembly Shifter ROD TOPFlood Headlight Wire HarnessConsole Panel Headlight BezelRepair Parts Snow Thrower - Model Number XT8527ES Drive Control ARM Speed Selector Assembly43 402689 Drive Plate Assembly END PlateClik PIN Axle ShaftRoll PIN 3/16 Sprocket417014X505 Engine Mount Plate KEY Part Description Engine Tecumseh Model LH318SA-156551HBelt Cover Traction BeltImpeller Belt Wheel Assembly LH 187833X428187865X428 Safety Ignition KEY Part KEY Description35062 181037 DECAL, DangerDECAL, DANGER, Deflector Service Notes Service Notes Limited Warranty

422073, 96192002301 specifications

The Poulan 96192002301, 422073 is a highly versatile and powerful line trimmer designed to meet the demanding needs of both residential users and professional landscapers. With its robust construction and advanced features, this trimmer stands out in a competitive market, making it an excellent choice for trimming grass, weeds, and other vegetation with precision and ease.

One of the main features of the Poulan 96192002301, 422073 is its powerful engine, which provides ample power to tackle even the toughest tasks. The engine is designed for efficient performance, ensuring that users can complete their work quickly and effectively. The trimmer's lightweight design enhances maneuverability, allowing users to reach difficult areas without fatigue during prolonged use.

The Poulan trimmer incorporates a 2-cycle engine with an efficient fuel system, optimizing fuel consumption while minimizing emissions. This combination of power and efficiency makes it an environmentally friendly option, attractive to those who are conscious of their carbon footprint. The easy starting mechanism reduces the effort required to start the engine, enabling users to get to work without hassle.

In terms of cutting performance, the Poulan 96192002301, 422073 boasts a durable trimmer head equipped with a dual-line setup. This feature allows for a wider cutting swath, significantly reducing trimming time and improving efficiency. The trimmer head can be easily reloaded, ensuring that you spend more time working on your landscaping tasks and less time on maintenance.

Comfort is also a focal point in the design of this trimmer. It features an adjustable handle, which can be customized to fit users of different heights, promoting ergonomic use and reducing strain on the back and arms during operation. The lightweight body further contributes to ease of use, ensuring that operators can handle the trimmer for extended periods without discomfort.

Safety is paramount in any equipment, and the Poulan 96192002301, 422073 includes several safety features to protect users. The protective guard prevents debris from being thrown at the operator, while the throttle lock ensures that the engine runs smoothly and consistently.

Overall, the Poulan 96192002301, 422073 is a powerful and efficient line trimmer that combines advanced technology with user-friendly features. Whether you are a homeowner looking to keep your yard pristine or a professional landscaper maintaining commercial properties, this trimmer is designed to deliver reliable performance and exceptional results. Its blend of power, efficiency, and comfort makes it a standout choice for anyone in need of a reliable trimming solution.
Top Page Image Contents