Poulan 421899, 96192001706 owner manual Maintenance

Page 13

MAINTENANCE

GENERAL RECOMMENDATIONS

The warranty on this snow thrower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain snow thrower as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your snow thrower. All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year, you should replace the spark plug and check belts for wear. A new spark plug will help your engine run better and last longer.

•Follow the maintenance schedule in this manual.

NOTE: Use only Original Equipment Manufacturer (OEM) parts to service this unit. Failure to do so can cause the unit to malfunction and pose a risk of injury to the operator.

LUBRICATION CHART

SAE 5W-30 Motor Oil

See “ENGINE”

in Maintenance section

General

Purpose

Grease

Pivot points

BEFORE EACH USE

1.Check engine oil level.

2.Check for loose fasteners.

3.Check controls to be sure they are functioning properly.

LUBRICATION

Keep your snow thrower well lubricated (See “LUBRICATION CHART”).

SNOW THROWER

Always observe the safety rules when performing any maintenance.

TIRES

•Maintain proper air pressure in both tires (14–17 P.S.I. / 19-24.5 N-m).

•Keeptiresfreeofgasolineandoil,whichcanharmrubber.

NOTE: To seal tire punctures and prevent flat tires due

 

to slow leaks, tire sealant may be purchased from your

 

local parts dealer. Tire sealant also prevents tire dry rot

13

and corrosion.

Engine oil

BELTS

Check belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See “TO REMOVE BELT COVER” in the Service and Adjustments section of this manual).

The belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer. Using other than OEM belts can cause personal injury or damage to the snow thrower.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents HOW to SET UP Your Snow Thrower Assembly / PRE-OPERATIONParts Packed Separately in Carton Remove Snow Thrower from CartonInstall Traction Drive Control ROD See Figs Install Speed Control ROD See FigsUnfold Upper Handle Install Discharge Chute / Chute Rotator Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Know Your Snow Thrower OperationPrimer Ignition KEYDrive speed control lever used to select forward or Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerTo Throw Snow See a Using the CLEAN-OUT Tool See FigTo Move Forward and Backward See Fig To Start Engine Before Starting the EngineBefore Stopping Snow Throwing TipsIf Recoil Starter has Frozen Maintenance Engine CleaningTo Adjust Snow Thrower Height Service and AdjustmentsChute Deflector Frame Auger Assembly Housing Handles Carburetor StorageEngine Speed Fuel SystemCylinder OtherTroubleshooting KEY Part Description Auger HousingScraper BAR Auger BearingAuger 27 RH Auger 27 LHSkid Plate LH Skid Plate RHExploded 178675X008 Corner Bracket Clean OUT Tool Gearbox AssemblyBearing Impeller PulleyDeflector Weldment Chute WeldmentDeflector Seal StrapCable Assembly LEVER/CABLE Rotator AssemblyRotator Head Rotator Pivot BracketRepair Parts Snow Thrower - Model NO. PR8527ES Handles 01.08.004-B Repair Parts Snow Thrower - Model NO. PR8527ES Carriage Bolt 5/16−18 X 155377 NUT 5/16−18 169675 Repair Parts Snow Thrower - Model NO. PR8527ES Drive Drive Plate Assembly Speed Selector AssemblyShoulder Screw END PlateRoll PIN 3/16 Axle ShaftSprocket Clik PINFrame ENGINE, TECEngine Mount Plate Traction Belt Belt CoverImpeller Belt Wheel Assembly LH Repair Parts Snow Thrower - Model NO. PR8527ES Wheels187833X421 187865X421Safety Ignition KEY Repair Parts Snow Thrower - Model NO. PR8527ES BAG of Parts35062 181037 Repair Parts Snow Thrower - Model NO. PR8527ES DecalsDECAL, Danger DECAL, DANGER, DeflectorService Notes Service Notes Limited Warranty

96192001706, 421899 specifications

The Poulan 421899,96192001706 is a powerful and versatile outdoor tool designed to meet the needs of both homeowners and professionals. This particular product is known for its reliability and effectiveness in various landscaping tasks, including trimming, pruning, and even cutting through tougher branches.

One of the standout features of this model is its robust engine, which provides ample power to tackle challenging outdoor jobs. The engine is designed for optimal performance, ensuring that users can complete their tasks swiftly without sacrificing efficiency. The combination of a strong engine and lightweight design allows for prolonged use without significant fatigue, making it a favorite among those who require a dependable tool for extended periods.

In terms of technology, the Poulan 421899,96192001706 boasts advanced anti-vibration features that significantly enhance user comfort. This technology minimizes the amount of vibration felt during operation, allowing for smoother handling and greater precision when trimming or cutting. Users will appreciate how this feature reduces strain on their arms and hands, making it easier to handle the tool over long durations.

The design of the Poulan 421899,96192001706 also prioritizes user-friendliness. The easy-start system ensures that the tool can be fired up with minimal effort, which can be particularly beneficial for those who may struggle with traditional starting methods. Additionally, the ergonomic handle provides a comfortable grip, further enhancing control and maneuverability.

Durability is another key characteristic of this model. Built from high-quality materials, it is designed to withstand the rigors of outdoor use, whether in residential settings or more demanding commercial environments. The materials used in construction are resistant to wear and tear, ensuring that the tool lasts for many years with proper maintenance.

Another notable aspect of the Poulan 421899,96192001706 is its versatility. With compatible attachments and a range of performance options, it can easily adapt to various tasks. This multifunctional capability makes it an invaluable addition to any toolkit, whether for landscaping, gardening, or general outdoor maintenance.

In conclusion, the Poulan 421899,96192001706 is a well-rounded outdoor tool that combines power, advanced technology, and ease of use. Its robust engine, anti-vibration features, and ergonomic design make it a top choice for those looking for efficiency and comfort in their outdoor tasks. With its durability and versatility, it stands out in the market, proving itself to be a reliable partner for both amateur gardeners and professional landscapers alike.
Top Page Image Contents