Poulan 421281, 96192002001 owner manual To Throw Snow See Fig, Using the CLEAN-OUT Tool See Fig

Page 11

OPERATION

TO THROW SNOW (See Fig. 15)

The auger rotation is controlled by the auger control lever located on the right side handle.

•Squeeze auger control lever to handle to engage the auger and throw snow.

•Release the auger control lever to stop throwing snow.

AUGER

CONTROL

LEVER

FIG. 15

USING THE CLEAN-OUT TOOL (See Fig. 16)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the au- ger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent ac- cidental starting.

•Release the auger control lever and shut off the engine.

•Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

•Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting engine.

•Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING

CLIP

TO MOVE FORWARD AND BACKWARD (See Fig. 17)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 17

POWER STEERING OPERATION (See Fig. 18)

Steering triggers are used to assist in steering your snow thrower. The triggers are located on the underside of each handle. When a trigger is squeezed, it disen- gages the drive wheel on that side of snow thrower and allows it to turn in that direction.

•To turn left – squeeze left side trigger.

•To turn right – squeeze right side trigger.

FIG. 16

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Parts Packed Separately in CartonRemove plastic tie securing rod to lower handle Install Speed Control ROD See FigsUnfold Upper Handle Install Discharge Chute / Chute Rotater Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Install Chute Deflector Remote Control See FigsIgnition KEY OperationKnow Your Snow Thrower PrimerDistance the snow is thrown Meets A.N.S.I. Safety RequirementsDeflector remote control lever used to change Auger control lever used to engage auger motion throw snowStopping HOW to USE Your Snow ThrowerRelease the auger control lever and shut off the engine Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Throw Snow See FigADD Gasoline See Fig To Adjust Skid Plates See FigBefore Starting the Engine Check Engine OIL Level See FigIf Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingLubrication MaintenanceGeneral Recommendations Before Each USEEngine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Other StorageTroubleshooting Exploded KEY Part Description Bearing Plug Auger HousingScraper BAR Auger BearingAuger 27 RH 420495X479Auger 27 LH 420496X479Deflector Seal Deflector Control AssemblyChute Weldment Deflector WeldmentPulley Pivot LEVER/CABLE Rotator AssemblyRotator Head Rotator Pivot Bracket405784X479 Pivot Support Weldment Loop Handle LHLoop Handle RH Handle Knob SpacerRetainer Knob REDShifter ROD Bottom Impeller ROD AssemblyTraction ROD Assembly Shifter ROD TOPFlood Headlight Wire HarnessConsole Panel Headlight BezelRepair Parts Snow Thrower - Model Number PP10527ES Drive Bottom PAN Speed Selector AssemblyDrive Plate Assembly END Plate01.03.002-A 417014X428 Engine Mount Plate KEY Part Description ENGINE, TECModel LH358SA-159628A 409346X428 FrameImpeller Belt Belt CoverTraction Belt Cable Bracket LH Cable Bracket RH Repair Parts Snow Thrower - Model Number PP10527ES WheelsClutch Slide CoverWheel Driver Retainer Ring Wheel Lobe35062 Safety Ignition KEYDECAL, Danger 181037DECAL, Danger DECAL, Poulan PRO DECAL, DANGER, DeflectorService Notes Limited Warranty

421281, 96192002001 specifications

The Poulan 421281,96192002001 is a high-performance lawn and garden tool that stands out for its powerful capabilities and user-friendly features. Designed for both homeowners and professionals, this model offers a blend of efficiency, durability, and innovation that makes yard work manageable and even enjoyable.

At the core of the Poulan 421281 is its robust engine that delivers strong performance, ensuring it can tackle even the toughest gardening tasks. With an easy-start mechanism, users can fire up the machine with minimal effort, reducing the frustration often associated with traditional equipment. This engine is designed to provide ample power while maintaining fuel efficiency, allowing users to complete their tasks without frequent refueling.

One of the key features of the Poulan 421281 is its ergonomic design. The tool is equipped with a comfortable grip that reduces fatigue during extended use. This attention to user comfort is complemented by a well-balanced structure, making the tool easy to maneuver across various landscapes, whether trimming hedges or managing grass heights.

The Poulan 421281 also integrates advanced technologies to enhance its functionality. This includes adjustable speed settings, enabling the user to customize performance according to specific tasks. Additionally, the tool incorporates a quick-release mechanism for its attachments, which allows for fast and seamless switching between different tasks, further enhancing productivity.

Durability is another critical aspect of the Poulan 421281. Constructed with high-quality materials, this tool is built to withstand the rigors of outdoor use. The components are designed to resist wear and tear, ensuring a long service life and minimizing the need for frequent repairs.

Moreover, safety features are thoughtfully included to protect the user. The Poulan 421281 is equipped with a safety lock-out mechanism that prevents accidental starts, providing peace of mind.

In conclusion, the Poulan 421281,96192002001 is an exceptional tool for anyone looking to maintain their lawn and garden effectively. Its powerful engine, user-friendly design, innovative technologies, and durable construction make it a reliable choice for both casual gardeners and professionals alike. Whether you're tackling tough overgrowth or simply maintaining your yard, this Poulan model is equipped to handle the job efficiently and safely.
Top Page Image Contents