Graphical User Interface GUI | BBE DS24, DS26 specs

GRAPHICAL USER INTERFACE (GUI)

The BBE SYSOMAX software provides a graphical method of programming on a DS24 or DS26. It can also be used to make changes in real time, if adjustments are required, during live operation. Full metering and control of all settings available on the PC.

Because it provides a more graphic and overall view, this method will allow you to program settings more efficiently than using the front panel naviga- tion method on the DS24/DS26.

Though the DS24 and DS26 stores up to ten programs, a virtually unlimit- ed number can be written and stored on a computer with the software installed.

Programs can be created whether or not the computer is connected to the DS24 or DS26 processor. However, it must be connected to write or mod- ify programs to the on-board memory of the processor.

All the functions available on board the unit are duplicated in the software.

8.1MINIMUM SYSTEM REQUIREMENTS

Your SYSOMAX software has the following minimum system requirements for operation: •Microsoft Windows 98, ME, NT4, 2000, or XP.

•Personal computer with Pentium 2 or higher processor. •20 megabytes (MB) of free hard disk space.

•64 MB RAM.

•Computer RS-232 serial port for connecting the DB-9 type serial programming cable to the computer (if your computer only has USB ports, adapters are commonly available.)

•DB-9 type serial cable for connecting the device to the computer. This cable is included with the unit. Should it become lost or damaged, replacement cables are available at electronics and computer supply stores.

8.2INSTALLING SYSOMAX ON YOUR COMPUTER

To install SYSOMAX from the CD-ROM:

1.Insert the CD-ROM into the computer’s CD-ROM drive.