Poulan 96192004201, 437986, PR624 To Throw Snow See Fig, Using the CLEAN-OUT Tool See Fig

Page 10

OPERATION

TO THROW SNOW (See Fig. 13)

The auger rotation is controlled by the auger control lever located on the right side handle.

•Squeeze auger control lever to handle to engage the auger and throw snow.

•Release the auger control lever to stop throwing snow.

AUGER

CONTROL

LEVER

FIG. 13

USING THE CLEAN-OUT TOOL (See Fig. 14)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the au- ger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent ac- cidental starting.

•Release the auger control lever and shut off the engine.

•Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

•Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting engine.

•Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING

CLIP

TO MOVE FORWARD AND BACKWARD (See Fig. 16)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 16

FIG. 14

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Traction Drive Control ROD See Figs Install Speed Control ROD See FigsUnfold Upper Handle Install Discharge Chute / Chute Rotater Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Electric start button used for starting the engineTo USE Fuel SHUT-OFF Valve See Fig HOW to USE Your Snow ThrowerStopping To USE Choke Control See FigTo Throw Snow See Fig Using the CLEAN-OUT Tool See FigTo Move Forward and Backward See Fig Before Starting the Engine Before Stopping Snow Throwing TipsTo Start Engine If Recoil Starter has FrozenBefore Each USE MaintenanceGeneral Recommendations LubricationCleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Carburetor To Adjust Cable Tension See FigTo Remove Wheels See Fig Engine SpeedFuel System StorageOther Engine OILTroubleshooting Exploded KEY Part Description Auger Assembly RH Auger HousingAuger Assembly LH Scrapper BARSkid Plate LH Auger BearingBearing Plug Skid Plate RHWasher Knob BlackPOP Rivet Plastic WasherCable Assembly Heat Shield LEVER/CABLE Rotator AssemblyCable Assembly Adjustable Rotator Head419797X431 Repair Parts Snow Thrower - Model Number PR624 HandlesLower Handle Knob RED SpacerRetainer Handle KnobShifter ROD TOP Impeller RODTraction ROD Shifter ROD BottomInterlock CAM Console PanelInterlock Spring Torsion SpringRepair Parts Snow Thrower - Model Number PR624 Drive Speed Selector AssemblyDrive Plate Assembly Rubber RingSprocket Axle ShaftRoll PIN 3/16 Clik PIN427963X421 Complete LCT EngineFrame Engine Mounting PlateIdler ARM Bracket Impeller BeltTraction Belt Idler Pulley432331X428 Repair Parts Snow Thrower - Model Number PR624 WheelsWheel Assembly LH 432332X428Snow Thrower - Model Number Safety Ignition KEY422663 181037 Repair Parts Snow Thrower - Model Number PR624 DecalsDECAL, Danger Service Notes Service Notes Limited Warranty

PR624, 437986, 96192004201 specifications

The Poulan 96192004201,437986,PR624 is a versatile and powerful snow thrower designed for efficient snow removal during harsh winter conditions. This model stands out due to its robust features and cutting-edge technologies, making it a popular choice among homeowners and professionals alike.

One of the key features of the PR624 is its powerful 24-inch clearing width, which allows users to tackle large areas of snow effectively. The machine's heavy-duty auger system is engineered to break through dense, compacted snow, ensuring that even the toughest winter storms can be managed with ease. The adjustable chute is another significant attribute, enabling users to direct the discharged snow exactly where they want, whether onto driveways, sidewalks, or lawns.

Equipped with a reliable, high-performance engine, the PR624 offers impressive start-up capabilities and smooth operation. This snow thrower is designed to handle a variety of snow types, from light flurries to heavy, wet snow, making it a versatile tool for various winter conditions. The engine’s efficiency enhances its performance while reducing fuel consumption, contributing to both cost savings and environmental benefits.

The PR624 features a user-friendly control panel, allowing for simple adjustments and operations even in challenging weather conditions. Its ergonomic handles provide comfort during extended use, reducing fatigue for the operator. Furthermore, the intuitive gear shift options facilitate seamless transitions between different speeds, ensuring optimal maneuverability on driveways or walkways.

Safety is a top priority in the design of the Poulan 96192004201,437986,PR624. It is equipped with several safety features, including an emergency shut-off mechanism, that provides peace of mind during operation. The durable construction materials and thoughtful design also make this snow thrower capable of withstanding harsh winter elements, ensuring longevity and reliability over the years.

Overall, the Poulan 96192004201,437986,PR624 snow thrower is an excellent investment for anyone needing an efficient and reliable way to manage snow accumulation during the winter months. Its combination of power, ease of use, and thoughtful design makes it a standout choice in the realm of snow removal equipment.
Top Page Image Contents