Poulan 96192003201, 429896 Using the CLEAN-OUT Tool See Fig, To Move Forward and Backward See Fig

Page 11

OPERATION

USING THE CLEAN-OUT TOOL (See Fig. 15)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the au- ger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent ac- cidental starting.

Release the auger control lever and shut off the engine.

Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting engine.

Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING

CLIP

FIG. 15

TO MOVE FORWARD AND BACKWARD (See Fig. 16)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

Squeeze traction drive control lever to handle to engage the drive system.

Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 16

POWER STEERING OPERATION (See Fig. 17)

Steering triggers are used to assist in steering your snow thrower. The triggers are located on the underside of each handle. When a trigger is squeezed, it disen- gages the drive wheel on that side of snow thrower and allows it to turn in that direction.

To turn left – squeeze left side trigger.

To turn right – squeeze right side trigger.

LH TURN

RH TURN

TRIGGER

TRIGGER

FIG. 17

TO ADJUST SKID PLATES (See Fig. 18)

NOTE: The wrench provided in your parts bag may be used to adjust the skid plates.

Skid plates are located on each side of the auger housing and adjust the clearance between the scraper bar and the ground surface. Adjust skid plates evenly to proper height for current surface conditions. For removal of snow in normal conditions, such as a paved driveway or sidewalk, place skid plates in the highest position (lowest scraper clearance) to give a 1/8" clearance between the scraper bar and the ground. Use a middle position if the surface to be cleared is uneven.

11

Image 11
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Parts Packed Separately in CartonUnfold Upper Handle Install Speed Control ROD See FigsInstall Traction Drive Control ROD See Figs Install Discharge Chute / Chute Rotater Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Install Chute Deflector Remote Control See FigsIgnition KEY OperationKnow Your Snow Thrower PrimerRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Adjust Skid Plates See FigCheck Engine OIL Level See Fig Before Starting the EngineScraper BAR See Fig To USE Drift Cutters See FigIf Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingLubrication MaintenanceGeneral Recommendations Before Each USEEngine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Engine Speed To Adjust Cable Tension See FigTo Remove Wheels See Fig CarburetorEngine OIL StorageOther Fuel SystemTroubleshooting KEY Part Description 23 22 Impeller Pulley Gearbox Assembly178675X008 Corner Bracket Clean OUT Tool BearingAuger Assembly 30 RH Auger Assembly 30 LHPlastic Washer Weight BARDrift Cutter BAR CARRIAGEBOLT5/16−18X.750Chute Snow Shield Deflector Spring 15 420679 Service Part Deflector ControlKnob Black POP RivetRotator Pivot Bracket LEVER/CABLE Rotator AssemblyCable Assembly Adjustable Rotator HeadPivot Support Loop Handle LHLoop Handle RH Lower TubeShifter ROD Bottom Impeller ROD AssemblyTraction ROD Assembly Shifter ROD TOPHalogen Headlight Wire HarnessPanel Console Headlight BezelRepair Parts Snow Thrower - Model Number PR1330ES Drive Exploded Rubber Ring AssemblyDrive Plate Assembly Speed SelectorEngine Mounting Plate Complete LCT EngineFrame 427963X428Idler Pulley Impeller BeltTraction Belt Idler ARM BracketCable Bracket RH Wheel Assembly LHCable Bracket LH Clutch Slide CoverWheel Driver Retainer Ring Wheel Lobe422663 Safety Ignition KEYDECAL, DANGER, Deflector 181037DECAL, Danger Limited Warranty

96192003201, 429896 specifications

The Poulan 429896,96192003201 is a high-performance chainsaw designed for both professional and residential use. This versatile tool is particularly favored for its robust features that enhance efficiency and ease of use.

One of the standout characteristics of the Poulan 429896 is its powerful engine. Equipped with a high-performance 42cc engine, this chainsaw provides ample power for cutting through tough wood and dense materials with ease. The engine is designed to deliver optimal torque and power, allowing users to complete tasks quickly without compromising on performance.

The chainsaw features a 16-inch bar and chain, ideal for a wide range of cutting applications. This size strikes a perfect balance between maneuverability and cutting capacity, making it suitable for trimming branches, felling small trees, and performing maintenance tasks around the yard. The bar and chain are designed for durability and long life, ensuring that the saw remains operational through extensive use.

One of the most valuable technologies integrated into the Poulan 429896 is the Easy Start feature. This function minimizes the effort required to start the engine, making it accessible for users of various skill levels. Whether you are a seasoned professional or a weekend warrior, the Easy Start technology ensures a hassle-free experience.

In terms of safety, the Poulan 429896 incorporates several features that enhance user protection. The chainsaw is equipped with a chain brake that engages automatically in the event of kickback, an essential safety feature that helps prevent accidents. Additionally, the ergonomic design of the handle provides a comfortable grip while minimizing vibrations, allowing for longer periods of use without discomfort.

Maintenance is also a key consideration with the Poulan 429896. The chainsaw is designed for easy access to the air filter and spark plug, making routine maintenance tasks more straightforward. This user-friendly design ensures that the chainsaw remains in peak condition for years to come.

Overall, the Poulan 429896,96192003201 stands out for its combination of power, efficiency, and safety. Whether you are tackling heavy-duty landscaping projects or light pruning, this chainsaw offers the reliability and performance needed to get the job done effectively. With its durable construction and user-friendly features, the Poulan 429896 is an excellent choice for anyone in need of a dependable chainsaw.