MTD C Style, D Style warranty Your Responsibility, Chute clean-out tool is fastened to the top

Page 3

��

��
��
	��
	��
	�
��	��
��	��
��	��
��	��
	��
	��
��	��
��	��
	��		��
	��		��
	��		��
��	��		��
��	��		��


��			��

��

��

��

��

��

��

��

��

��

A chute clean-out tool is fastened to the top of the

�� auger housing with a mounting clip. The tool is designed to clear a chute assembly of ice and snow.

This item is fastened with a cable tie at the factory. Cut the cable tie before operating the snow thrower.

WARNING: Never use your hands to clear a clogged chute assembly. Shut off engine and remain behind handles until all moving parts have stopped before using the clean-out tool to clear the chute assembly.

1

Safety

Labels

WARNING

This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before at- tempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol.

HEED ITS WARNING!

Your Responsibility

Restrict the use

of this power machine to persons who read, understand

and follow the warnings and instructions

in this manual

and on the machine.

3

Image 3

Contents 06/08/2005 Two-Stage Snow Thrower C, D StyleMTD LLC, P.O. BOX 361131 CLEVELAND, Ohio Form no -01274CTable of Contents Finding and Recording Model NumberCustomer Support Your Responsibility Chute clean-out tool is fastened to the topYour Responsibility Restrict the use TrainingPreparationYour Responsibility Maintenance & StorageOperation Do not modify enginePosition the chute assembly over the base Setting Up Your Snow ThrowerTire Pressure Remove the flat washer and hairpin clip from the endChute directional control Know Your Snow Thrower Operating Your Snow ThrowerDrive Control Clean-Out ToolChute Assembly Auger ControlElectric Starter Gas & Oil Fill-UpStopping The Engine If your home’sRecoil Starter Chute Clean-Out ToolTo Engage Drive To Engage AugersMaking Adjustments Surrounding property Chute Bracket AdjustmentTo adjust the skid shoes Retightening the nutsShave Plate and Skid Shoes Maintaining Your Snow ThrowerEngine LubricationAuger Belt Replacement Drive Belt Replacement Cracking and replace if necessary That it rests on the auger housingAssembly off the shaft Friction Wheel RemovalOff-Season Storage Preparing EnginePreparing Snow Thrower Problem Cause Remedy Trouble ShootingStyles C & D To order replacement Parts, contact Or visit Styles C & D 710-0604A Handle Ass’y, Lock LHHandle Ass’y, Lock, RH 710-0376Styles C & D 712-0413 Disc, Friction Wheel684-04153 684-04154Page Page MANUFACTURER’S Limited Warranty for