SECTION 4: LOOSE PARTS & HARDWARE PACK
IMPORTANT: After assembly, service engine with gasoline, and check oil level as instructed in the sep- arate engine manual packed with your unit.
TOOLS REQUIRED FOR ASSEMBLY
•Pair of pliers
•Two adjustable wrenches
UNPACKING
1.Remove staples or break glue on the top flaps of the carton. Remove any loose parts included with unit (i.e., Operator’s Manual, etc).
2.Cut along corners and lay end of carton down flat. Remove packing material.
3.Roll unit out of carton. Check carton thoroughly for loose parts before discarding.
CONTENTS IN CARTON See Figure 3
•Right and Left Handles
•Handle Panel Assembly
•Chute Assembly
•Chute Directional Control Assembly
•Shift Rod
•Hardware Pack
Handle Panel Assembly |
Handles |
Chute |
Assembly |
Chute Directional |
Control Assembly |
Shift Rod |
Figure 3
5