Poulan 421888 owner manual To Throw Snow See Fig, Using the CLEAN-OUT Tool See Fig

Page 10

OPERATION

TO THROW SNOW (See Fig. 13)

The auger rotation is controlled by the auger control lever located on the right side handle.

•Squeeze auger control lever to handle to engage the auger and throw snow.

•Release the auger control lever to stop throwing snow.

AUGER

CONTROL

LEVER

FIG. 13

USING THE CLEAN-OUT TOOL (See Fig. 14)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the au- ger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent ac- cidental starting.

•Release the auger control lever and shut off the engine.

•Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

•Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting engine.

•Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING

CLIP

TO MOVE FORWARD AND BACKWARD (See Fig. 15)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 15

TO ADJUST SKID PLATES (See Fig. 16)

NOTE: The wrench provided in your parts bag may be used to adjust the skid plates.

Skid plates are located on each side of the auger housing and adjust the clearance between the scraper bar and the ground surface. Adjust skid plates evenly to proper height for current surface conditions. For removal of snow in normal conditions, such as a paved driveway or sidewalk, place skid plates in the highest position (lowest scraper clearance) to give a 1/8" clearance between the scraper bar and the ground. Use a middle position if the surface to be cleared is uneven.

NOTE: It is not recommended to operate the snow thrower over gravel or rocky surfaces. Objects such as gravel, rocks or other debris, can easily be picked up and thrown by the impeller, which can cause serious personal injury, property damage or damage to the snow thrower.

•If snow thrower must be operated over gravel surface, use extra caution and be sure skid plates are adjusted to lowest (highest scraper clearance) position.

FIG. 14

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Speed Control ROD See Figs Unfold Upper HandleInstall Discharge Chute / Chute Rotater Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting the engineTo USE Fuel SHUT-OFF Valve See Fig HOW to USE Your Snow ThrowerStopping To USE Choke Control See FigTo Throw Snow See Fig Using the CLEAN-OUT Tool See FigTo Adjust Skid Plates See Fig To Move Forward and Backward See FigCheck Engine OIL Level See Fig Before Starting the EngineScraper BAR See Fig ADD Gasoline See FigBefore Stopping Snow Throwing TipsTo Start Engine If Recoil Starter has FrozenBefore Each USE MaintenanceGeneral Recommendations LubricationCleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Storage OtherTroubleshooting Service Notes Exploded KEY Part Description Auger Bearing Auger HousingScrapper BAR Bearing PlugAuger Assembly LH Auger Assembly RHWasher Knob BlackPOP Rivet Plastic WasherRotator Pivot Bracket LEVER/CABLE Rotator AssemblyRotator Head Pulley PivotHandle Grip Repair Parts Snow Thrower - Model Number PR208 HandlesPanel Bracket LH Panel Bracket RH Lower HandleKnob RED SpacerRetainer Handle KnobShifter ROD TOP Impeller ROD AssemblyTraction ROD Assembly Shifter ROD Bottom01.10.001-B Console PanelRepair Parts Snow Thrower - Model Number PR208 Drive END Plate Speed Selector Assembly43 402689 Drive Plate Assembly Control ARMSprocket Axle ShaftRoll PIN 3/16 Clik PINKEY Part Description LCT Engine Model PLMHK18600781DP 417014X428 Engine Mount PlateTraction Belt Belt CoverImpeller Belt 187831X417 Repair Parts Snow Thrower - Model Number PR208 WheelsWheel Assembly LH 187866X417Retainer PIN Repair Parts Snow Thrower - Model Number PR208 BAG of PartsSafety Ignition KEY WrenchRepair Parts Snow Thrower - Model Number PR208 Decals Service Notes Service Notes Limited Warranty

421888 specifications

The Poulan 421888 is a powerful and versatile chainsaw designed for both professionals and hobbyists seeking reliability and performance in their cutting tasks. Renowned for its robust construction and ease of use, this model is particularly well-suited for a range of applications, from light trimming to more demanding tree felling and firewood preparation.

One of the standout features of the Poulan 421888 is its efficient engine. The chainsaw is equipped with a potent 42cc two-stroke engine that provides ample power for various cutting tasks while maintaining a lightweight design. This balance of power and weight allows users to operate the saw for extended periods without excessive fatigue. The engine also incorporates advanced technologies that contribute to optimal fuel efficiency, ensuring users can complete their work without constantly refueling.

Another notable characteristic of the Poulan 421888 is its easy-start mechanism. The innovative starting system reduces the effort required to fire up the engine, making it accessible for a broader range of users, including those who may be less experienced with chainsaws. Additionally, the chainsaw features an automatic oiler that ensures the chain remains adequately lubricated during operation, which extends the life of the chain bar and enhances cutting efficiency.

Safety is a paramount consideration in chainsaw design, and the Poulan 421888 addresses this with its comprehensive safety features. It comes equipped with a chain brake that stops the chain almost immediately in the event of a kickback, protecting the user from potential injuries. Furthermore, it includes a handguard and anti-vibration handles that improve comfort and stability while reducing operator fatigue.

The Poulan 421888 also places an emphasis on user-friendly maintenance. With its tool-less chain tensioning system, adjusting the chain for optimal tension is a quick and straightforward process, allowing users to focus on their work rather than wrestling with complex adjustments. The durable construction of the chainsaw ensures it can withstand the rigors of frequent use in various environments.

In summary, the Poulan 421888 is a well-rounded chainsaw that excels in providing power, efficiency, and safety. Its advanced features and user-centric design make it a reliable choice for anyone in need of a robust cutting tool, whether for professional landscaping, forestry work, or home improvement projects. With the Poulan 421888, users can tackle their cutting tasks with confidence and ease.
Top Page Image Contents