Poulan PO927ES owner manual Table of Contents

Page 3

6.When cleaning, repairing or inspecting the snow thrower, stop the engine and make certain the collector/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent someone from accidentally starting the en- gine.

7.Do not run the engine indoors, except when starting the engine and for transporting the snow thrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

8.Exercise extreme caution when operating on slopes.

9.Never operate the snow thrower without proper guards, and other safety protective devices in place and work- ing.

10.Never direct the discharge toward people or areas where property damage can occur. Keep children and others away.

11.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

12.Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when operating in reverse.

13.Disengage power to the collector/impeller when snow thrower is transported or not in use.

14.Use only attachments and accessories approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, or cabs).

15.Never operate the snow thrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk; never run.

16. Never touch a hot engine or muffler.

Clearing a Clogged Discharge Chute

Hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snow throwers. Never use your hand to clean out the dis- charge chute. To clear the chute:

1.SHUT THE ENGINE OFF!

2.Wait 10 seconds to be sure the impeller blades have stopped rotating.

3.Always use a clean-out tool, not your hands.

Maintenance and Storage

1.Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

2.Never store the machine with fuel in the fuel tank inside a building where ignition sources are present such as hot water heaters, space heaters, or clothes dryers. Allow the engine to cool before storing in any enclosure.

3.Always refer to operator’s manual for important details if the snow thrower is to be stored for an extended period.

4.Maintain or replace safety and instruction labels, as necessary.

5.Run the machine a few minutes after throwing snow to prevent freeze-up of the collector/impeller.

CONGRATULATIONS on your purchase of a new snow thrower. Ithasbeendesigned,engineeredandmanufactured to give best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower properly. Always observe the “SAFETY RULES”.

SERIAL NUMBER: ___________________________

DATE OF PURCHASE: _______________________

THE MODELAND SERIAL NUMBERS WILL BE FOUND ONADECALATTACHED TO THE REAR OF THE SNOW THROWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

PRODUCT SPECIFICATIONS

Gasoline Capacity

4.0 Quarts

and Type:

Unleaded Regular only

 

 

Oil Type

SAE 30 (above 40°F)

(API SG–SL):

SAE 5W-30 or 10W-30 (0° to +40°F)

 

SAE 0W-30 (below 0°F)

 

 

Oil Capacity:

26 Ounces

 

 

Spark Plug:

Champion RN4C (Gap: .030")

 

 

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your snow thrower.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

3

CUSTOMER RESPONSIBILITIES

3

ASSEMBLY / PRE-OPERATION

5-7

OPERATION

8-13

MAINTENANCE

14-15

MAINTENANCE SCHEDULE

14

SERVICE AND ADJUSTMENTS

16-18

STORAGE

18

TROUBLESHOOTING

19

REPAIR PARTS

20-31

3 WARRANTY

32

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Unfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsInstall Discharge Chute / Chute Rotater Head See Fig Install Chute Deflector Remote Control See FigsCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerDeflector remote control lever used to change Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Throw Snow See FigBefore Starting the Engine Scraper BARTo Start Engine Snow Throwing Tips Before StoppingIf Recoil Starter has Frozen Maintenance Engine CleaningService and Adjustments To Adjust Snow Thrower HeightChute Deflector Remove the klik pin and remove wheel from axle To Remove Wheels See FigOther StorageTroubleshooting Limited Warranty

PO927ES specifications

The Poulan PO927ES is a powerful and efficient gas-powered snow blower designed to tackle a variety of winter weather conditions. This robust machine combines innovative technology with user-friendly features, making it an ideal choice for homeowners needing to keep their driveways, sidewalks, and other outdoor areas clear of snow.

One of the key features of the PO927ES is its 27-inch clearing width, allowing for substantial snow removal in fewer passes. This makes it perfect for both light and heavy snowfall, ensuring efficiency during winter storms. Additionally, the 12-inch intake height enables the snow blower to handle deeper accumulations, making it suitable for different snowfall conditions.

The Poulan PO927ES is powered by a reliable 305cc engine, delivering ample power to slice through heavy, wet snow with ease. Its recoil start system ensures that users can quickly power on the machine, so they can get to work without delay. This dependable engine provides enough torque to clear even the densest snow, ensuring smooth performance throughout the winter season.

Equipped with a two-stage snow clearing system, the PO927ES efficiently discharges snow through a high-throw chute. The adjustable chute allows users to control the direction and distance of snow discharge, with a range of up to 30 feet. This feature is particularly advantageous in reducing snow mounds and ensuring that cleared areas remain accessible.

User comfort has been prioritized in the design of the PO927ES. The machine features heated hand grips, allowing for prolonged use in cold weather without discomfort. Additionally, its ergonomic controls and easy-to-navigate dashboard put the power of snow removal right at the fingertips of the user.

The snow blower also boasts heavy-duty steel construction, providing durability and longevity. The rugged build is designed to withstand the rigors of snowy conditions, ensuring that it remains a reliable tool for many winters to come.

Furthermore, the Poulan PO927ES is built with an adjustable and self-propelled drive system. This means users can select their preferred speed and power through varying terrain with confidence. The large, rugged tires enhance traction, ensuring stability and control during operation.

In conclusion, the Poulan PO927ES blends power, efficiency, and user-friendliness into a robust snow removal solution. Its impressive features, reliable engine, and thoughtful design make it a go-to choice for homeowners dealing with winter's challenges. Whether it's light flurries or heavy snowfalls, this snow blower rises to the occasion, ensuring that outdoor spaces remain safe and accessible throughout the cold months.
Top Page Image Contents