Poulan 96194000501 Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector

Page 15

SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or adjustments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot contact plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deflector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deflector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

•To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 19)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt and spacer. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

The impeller is secured to the impeller shaft with two (2) capscrew/shear bolts and hex nuts. Should a foreign object or ice become lodged in the impeller, the capscrews are designed to break, preventing damage to any other com- ponents. If impeller does not turn when auger control lever is engaged, check to see if the capscrews have sheared. To replace the capscrew/shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

SPACER

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 19

TO REMOVE BELT COVER (See Fig. 20)

1.Remove the two screws securing belt cover to frame.

2.Remove belt cover.

•Replace belt cover by installing cover and screws and tighten securely.

FRAME

BELT COVER

SCREWS

FIG. 20

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Parts Packed Separately in Carton Assembly / PRE-OPERATIONTool BOX See Fig HOW to SET UP Your Snow ThrowerInstall Speed Control ROD See Figs Install Traction Drive Control ROD See FigsInstall Auger Control ROD See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerMeets A.N.S.I. Safety Requirements Stopping HOW to USE Your Snow ThrowerUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Before Starting the Engine If Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingMaintenance Engine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Storage Other Troubleshooting¡ATENCIÓN! ¡ESTE ALERTO! SU Seguridad Esta Comprometida PreparaciónFuncionamiento Montaje / PRE-OPERACIÓN Sacar LA Máquina Quitanieves DEL Cartón Montaje / PRE-OPERACIÓNMontaje DE LA Biela Como Preparar SU Máquina QuitanievesDesplegar LA Empuñadura Superior Montar LA BielaControlar LA Presión DE LOS Neumáticos DE Mando DE LA Barrena Ver Figs yFamiliarícese CON SU Máquina Quitanieves OperaciónPlacas DE Controlar LA Eyección DE LA Nieve Como Utilizar SU Máquina QuitanievesPararse Lanzar LA Nieve Ver Fig Moverse Adelante Y Atrás Ver FigUsar LA Herramienta Para Limpiar Ver Fig Controlar EL Nivel DE Aceite DEL Motor Ver Fig Antes DE Poner EN Marcha EL MotorRegular LAS Placas DE Deslizamiento Ver Fig Barra DE Arrastre Ver FigSI EL Arrancador DE Retroceso SE HA Congelado Consejos Para Lanzar LA NievePuesta EN Marcha DEL Motor Antes DE PararMantenamiento Recomendaciones GeneralesLubricación Limpieza Pernos DE Seguridad Ver Fig Servicio Y AdjustesPara Ajustar LA Altura DE Máquina Quitanieves Conducto DeflectorVaciar LA Gasolina DEL Depósito DE Carburante Sustituir LAS Correas Vea FigAlmacenimiento MotorOtros Identificacion DE Problemas   KEY Part Description 205 414280 Knob, Lever Repair Parts Handles Snow Thrower Model Number Repair Parts Snow Thrower Model Number 96194000501 Handles Repair Parts Snow Thrower Model Number 96194000501 Drive Repair Parts Snow Thrower Model Number 96194000501 Drive Page KEY Part Description 416717X004413429X479 Page 181038 Decal, Danger Limited Warranty

96194000501 specifications

The Poulan 96194000501 is a powerful and versatile tool designed for homeowners and professionals alike, making yard maintenance an efficient and enjoyable task. Packed with features that cater to a variety of lawn care needs, this lawn mower offers exceptional performance and durability.

One of the standout features of the Poulan 96194000501 is its robust engine. Powered by a reliable 4-cycle gasoline engine, it provides the necessary power to tackle even the toughest grass and terrain. The engine is designed for easy starting, eliminating the frustration often associated with traditional pull-start mechanisms. This feature allows users to get right to work without the hassle of prolonged setup and preparation.

The cutting system of the Poulan 96194000501 is engineered for precision and efficiency. It features a wide cutting deck that allows for a broader cutting path, reducing the time spent mowing. The adjustable cutting heights enable users to customize their mowing experience, accommodating various grass types and seasonal changes. This flexibility ensures a clean, even cut that promotes a healthier lawn.

In addition to its performance features, the Poulan 96194000501 is designed with user comfort in mind. The ergonomic handle ensures a comfortable grip, reducing fatigue during extended use. The mower's lightweight design makes it easy to maneuver, allowing users to navigate tight spaces and obstacles with ease. Furthermore, the inclusion of larger rear wheels enhances stability and traction, making it suitable for uneven terrain.

Durability is another key characteristic of the Poulan 96194000501. Constructed with high-quality materials, this mower is built to withstand the rigors of regular use. Its sturdy frame and deck resist wear and tear, ensuring a long lifespan for the product. Additionally, maintenance tasks are simplified, with features that facilitate easy access to the engine and other components.

The Poulan 96194000501 is also eco-friendly, designed to produce lower emissions compared to traditional models. This environmentally conscious approach allows users to maintain their lawns without contributing significantly to pollution, reflecting a growing trend toward sustainable gardening practices.

In summary, the Poulan 96194000501 stands out in the marketplace due to its powerful performance, user-friendly features, and durability. With an efficient cutting system, adjustable heights, ergonomic design, and eco-friendly operation, this lawn mower proves to be an excellent investment for anyone looking to enhance their lawn care experience. Whether for regular maintenance or tackling larger landscaping projects, the Poulan 96194000501 rises to the occasion, making it a reliable choice for all users.
Top Page Image Contents