Poulan PP208E24 Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector

Page 15

SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or ad- justments:

1.Be sure the on/off switch is in the OFF position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

To replace the capscrew/shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deflector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deflector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

•To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 18)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a spacer, shear bolt and hex nut. Should a foreign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

The impeller is secured to the impeller shaft with two (2) capscrew/shear bolts and hex nuts. Should a foreign object or ice become lodged in the impeller, the capscrews are designed to break, preventing damage to any other com- ponents. If impeller does not turn when auger control lever

is engaged, check to see if the capscrews have sheared. 15

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 18

TO REMOVE BELT COVER (See Fig. 19)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

3.Replace belt cover by installing cover and screws and tighten securely.

BELT

COVER

FRAME

SCREWS

FIG. 19

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Parts Packed Separately in CartonInstall Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerElectric start button used for starting the engine Meets A.N.S.I. Safety RequirementsTo USE Choke Control See Fig HOW to USE Your Snow ThrowerStopping To USE Fuel SHUT-OFF Valve See FigUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Before Starting the Engine If Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingLubrication MaintenanceGeneral Recommendations Before Each USEEngine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Engine Speed To Adjust Cable Tension See FigTo Remove Wheels See Fig CarburetorEngine OIL StorageOther Fuel SystemTroubleshooting 01.07.004-C KEY Part Description Scrapper BAR Auger HousingAuger Assembly LH Auger Assembly RHBearing Plug Auger BearingStrap Chute WeldmentDeflector Weldment Deflector SealRotator Head LEVER/CABLE Rotator AssemblyCable Assembly Adjustable Cable Assembly Heat ShieldPivot Support Panel Bracket LH Panel Bracket RHHandle Grip Lower TubeHandle Knob SpacerRetainer Knob REDShifter ROD Bottom Impeller RODTraction ROD Shifter ROD TOPTorsion Spring Console PanelInterlock Spring Interlock CAMRepair Parts Snow Thrower - Model Number PP208E24 Drive END Plate Speed Selector AssemblyDrive Plate Assembly WheelhubClik PIN Axle ShaftRoll PIN 3/16 Sprocket423184X428 Cover AssemblyComplete LCT Engine FrameIdler Bushing Impeller BeltTraction Belt Idler ARMWheel Assembly LH 187831X421187866X421 422663 Safety Ignition KEYDECAL, Auger Lever RT DECAL, DangerDECAL, DANGER, Deflector DECAL, InstructionService Notes Service Notes Limited Warranty

PP208E24 specifications

The Poulan PP208E24 is a high-performance gas-powered chainsaw designed to meet the demands of homeowners and professional users alike. Combining efficiency, durability, and ease of use, this model is an excellent choice for those tackling a variety of cutting tasks, including tree pruning, firewood chopping, and general yard maintenance.

One of the standout features of the PP208E24 is its robust 20-inch bar, which provides ample cutting length for felling larger trees and processing logs. This extended reach allows users to accomplish cutting tasks more quickly while maintaining a professional level of control and precision. The chainsaw is powered by a potent 50cc two-stroke engine, delivering strong performance and reliable power. This engine ensures smooth operation, even under heavy load, making it suitable for both domestic and light commercial use.

The design of the Poulan PP208E24 incorporates several advanced technologies aimed at improving user experience. One notable feature is the Easy Start system, which reduces the effort required to start the chainsaw, making it accessible for users of all experience levels. This technology minimizes the pull resistance, allowing for quicker and more comfortable starting.

Safety is a key consideration in the design of the PP208E24. It comes equipped with a chain brake that instantly stops the chain in case of kickback, providing enhanced protection for the operator. Additionally, the chainsaw features a low kickback chain, further decreasing the potential for injuries, and ensuring a safer cutting experience.

Another important characteristic of the Poulan PP208E24 is its lightweight design. Weighing in at approximately 13 pounds, this chainsaw is easy to maneuver and transport, reducing operator fatigue during extended use. Despite its light weight, the unit is solidly constructed, ensuring longevity and resilience over time.

In terms of maintenance, the PP208E24 features a tool-less chain tensioning system, allowing users to quickly adjust the chain without the need for additional tools. This convenience means that users can spend less time on upkeep and more time cutting.

Overall, the Poulan PP208E24 combines power, safety, and user-friendly features, making it a reliable choice for cutting enthusiasts. Whether you're pruning branches or cutting firewood, this chainsaw offers the performance and convenience needed to get the job done efficiently. With its attention to safety and ease of use, the PP208E24 is an investment that will serve users well for years to come.
Top Page Image Contents