Simplicity 1694850, 1694915, 1694872, 1694914, 1694867, 1694848 Handles and Controls Group Channel

Handles and Controls Group - Channel

NOTE: Unless noted otherwise, 987044

use the standard hardware torque specification chart.

11

		1	2				10			12
Linkage adjustment for traction and
auger drive with power boost: with						8
drive levers engaged, the bottom end of							9
lower rods (Ref. 40 & 66) should be flush
with bottom of springs (Ref. 39 & 68).			4	5					13
					7		14
				6
		3
							15 16	17
		69						18	19
	71
			72						20
			4
									12	22
									4	23	96
64	56										24
				21			12		5	4
	66		70
			69
			68				28		25		37
									26		38
									29	30
											39
			67							31
	65	Shift rod assembly					27		35
	63	(Ref. 71) must pivot					34
		freely on pivot blocks
		(Ref. 21).

	56
		Mount clutch cable
62	62	to cable support, see
		Engine & Frame.	Torque to
	56
			19 - 29 ft-lbs.
	61	See Auger Housing and
		Chute Group - 38"

33

36

43	39
	42

32

34

40

60	To engine
	ground
	58
	To engine

44

53	Mount bushings (Ref. 78)	42
	with flange on inside of
	brackets, 3 places.

39

41

59 plug

To headlight

To spout

motor

55

54

56

57	Slot towards
	rear of unit.

44	48
	49
39

47 45

50 46

51The holes in the frame for Ref. 51 are slotted so the gear support (Ref. 45) can be positioned to ensure the inside surface of the gear support is tight against the hub of the front gear (Ref. 50).

52

The above parts group applies to the following Mfg. Nos.:

1694847	- 10560E	1694872	- 1390E
1694848	- 10560EX	1694915	- 1390EX
1694849	- 11570E
1694850	- E11570
1694851	- 1380E
1694852	- E1380

© Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 6 TP 400-4250-00-LW-S