HP 8000 s manual Toner, Install Fuser, Install Imaging, Open Front Door, Transfer Drum, Left

Control Panel
Message	Description	Recommended Action
INSTALL <Color>	One or more of the four	Insert the cartridge or make
TONER	toner cartridges are either	sure the installed cartridge is
	not installed or not	fully seated in the printer.
	correctly installed in the
	printer.
	<Color> can be cyan,
	magenta, yellow, or black.
INSTALL FUSER	The printer has detected	Install the fuser and verify that
LOWER LEFT DOOR	that the fuser is not	it is properly seated in the
	installed.	printer before attempting to
		print. See the installation guide
		included with the fuser kit.
INSTALL IMAGING	The printer has detected	Install the imaging drum before
DRUM	that the imaging drum is	attempting to print. See the
OPEN FRONT DOOR	not installed.	getting started guide or the
		installation guide included with
		the drum kit.
INSTALL	The printer has detected	Install the transfer drum before
TRANSFER DRUM	that the transfer drum is	attempting to print. See the
OPEN RIGHT DOOR	not installed.	getting started guide or the
		installation guide included with
		the transfer kit.
LEFT	The left output bin on the	Remove all media from the left
OUTPUT BIN FULL	printer is full.	output bin of the printer to
		continue printing.
LOCK TONER LEVER	The blue lever inside the	Open the front door of the
	clear door is not locked.	printer, open the clear door,
		swing the blue lever to the left
		to lock it, and close the clear
		door and the front door.
MAILBOX X	A mailbox on the multi-bin	Remove all media from the
OUTPUT BIN FULL	mailbox is full (X can be	mailbox.
	mailbox 1 through 8).

EN Control Panel Features 12