Control Panel |
|
|
Message | Description | Recommended Action |
|
|
|
|
|
|
TONER LOW | The printer is almost out of | Although printing can continue, |
REPLACE <Color> | the specified toner. | the toner cartridge should be |
| <Color> can be cyan, | replaced for optimum printer |
| magenta, yellow, or black. | operation. See the installation |
|
| guide included with the toner |
|
| cartridge. |
|
|
|
TONER OUT | The printer is out of the | Printing cannot continue until |
REPLACE <Color> | specified color of toner. | the specified toner cartridge |
| <Color> can be cyan, | has been replaced. See the |
| magenta, yellow, or black. | installation guide included with |
|
| the toner cartridge. |
|
|
|
TOO MANY PAGES IN | The job height is greater | See the stapling specifications |
JOB TO STAPLE | than the stapler capacity. | in the user guide for more |
| The height of the job to be | information. |
| stapled should not exceed |
|
| 5 mm. |
|
|
|
|
TOP | The top output bin on the | Remove all media from the top |
OUTPUT BIN FULL | printer is full. | output bin. |
|
|
|
TRANSFER KIT LOW | The transfer drum, transfer | Although printing can continue, |
REPLACE KIT | belt, cleaning roller, and | the transfer kit should be |
| filters are almost past their | replaced for optimum printer |
| specified life. | operation. See the installation |
|
| guide included with the transfer |
|
| kit. |
|
|
|
TRANSFER KIT OUT | The transfer drum, transfer | Replace the transfer kit and |
REPLACE KIT | belt, cleaning roller, and | reset the transfer counter |
| filters are past their | before attempting to print. See |
| specified life. | the installation guide included |
|
| with the transfer kit. |
|
|
|
TRAY 1 CONTAINS | Media was stacked in tray | Configure the media type for |
UNKNOWN MEDIA | 1 for continuous manual | tray 1 or remove the remaining |
| feed printing and the job | media. See “Configuring Media |
| has been completed. | Type and Size” on page 32. |
| However, media remains in |
|
| tray 1. Tray 1 is considered |
|
| to be not configured. |
|
|
|
|
TRAY 1 LOAD | There is a user request for | Load the media type and size |
<Type> <Size> | a media size that is not | specified on the display. After |
| currently installed in tray 1. | loading the tray, the printer |
|
| brings itself online. |
|
|
|
EN | Control Panel Features 15 |
