HP 8000 s Comm Error, Check Cables, Cycle Power, Mailbox not, Attached, Manually Feed, NEW Toner

Control Panel
Message	Description	Recommended Action
MAILBOX	Indicates a communication	Verify that the communication
COMM ERROR	error between the multi-bin	and power cables are
CHECK CABLES	mailbox and the printer.	connected. Press GO to
AND CYCLE POWER		continue printing. If the
		message persists, turn the
		printer off and on to reset the
		printer. If the condition still
		persists, contact a local
		authorized HP dealer or
		service representative for
		service.
MAILBOX NOT	The multi-bin mailbox is not	Push the mailbox up against
ATTACHED	correctly attached to the	the printer. Verify that the
	printer.	wheels on the multi-bin
		mailbox are not preventing the
		mailbox from attaching to the
		printer.
MANUALLY FEED	The printer is requesting	Load the proper type and size
<Type> <Size>	that a sheet of media or an	media into tray 1.
	envelope be manually fed.
NEW TONER	This message will appear if	Change to YES and press
CARTRIDGE? = NO	the printer senses that a	SELECT if you just installed a
	TONER LOW or TONER OUT	toner cartridge.
	message has appeared	Press ITEM+ until you see
	and then gone away,	NEW TONER=BLACK.
	indicating that a new toner	Press VALUE+ until the new
	cartridge may have been	cartridge appears, then press
	installed.	SELECT.
OFFLINE	The printer is offline and	Press Go to bring the printer
	there are no error	online.
	messages pending.
OUTPUT BIN FULL	The bin-full sensor in the	Empty the Face-up Bin.
alternates with	left Face-up Bin has been
CLEAR PAPER FROM	reached.
FACE UP
OUTPUT BIN FULL	The Stacker Bin is full.	Empty the Stacker Bin.
alternates with
CLEAR PAPER FROM
OPTIONAL BIN 1

EN Control Panel Features 13