HP 8000 s Drum Error, Replace KIT, Drum Life LOW, Drum Life OUT, Replace Drum KIT, Duplex Error

Control Panel
Message	Description	Recommended Action
DRUM ERROR	The printer has detected	Printing cannot continue until
REPLACE KIT	an error in the imaging	the drum kit has been
	drum.	replaced. See the installation
		guide included with the drum
		kit.
DRUM LIFE LOW	The imaging drum is	Although printing can continue,
REPLACE KIT	almost past its specified	the drum kit should be
	life.	replaced for optimum printer
		operation. See the installation
		guide included with the drum
		kit.
DRUM LIFE OUT	The imaging drum is past	Printing cannot continue until
REPLACE DRUM KIT	its specified life.	the drum kit has been
		replaced. See the installation
		guide included with the drum
		kit.
DUPLEX ERROR	The printer has detected	Remove the duplexer. Check
CHECK DUPLEXER	an error in the duplexer	for and remove any jammed
	preventing two-sided	media from the duplexer and
	printing.	reinstall the duplexer.
FACE UP	The top output bin of the	Remove all media from the top
OUTPUT BIN FULL	multi-bin mailbox is full.	output bin on the multi-bin
		mailbox.
FUSER LIFE LOW	The fuser is almost past its	Although printing can continue,
REPLACE KIT	specified life.	the fuser should be replaced
		for optimum printer operation.
		See the installation guide
		included with the fuser kit.
FUSER LIFE OUT	The fuser and paper rollers	Replace the fuser kit and reset
REPLACE KIT	are past their specified life.	the fuser counter before
		attempting to print. See the
		installation guide included with
		the fuser kit.
INPUT DEVICE	The media transfer door on	Close the media transfer door.
PAPER PATH OPEN	tray 4 is open.

EN Control Panel Features 11