To load media into tray 4
1 Firmly grip the handle in the center of the input tray, squeeze the release lever, and pull the input tray out until it stops.
NOTE
To use the media size currently configured in the input tray, go to step 5. To use a different size, go to step 2.
2 Adjust the front media guide by pulling up on the pin (A), placing the media guide into the slots on the top and bottom of the input tray that correspond to the media size you are loading (B), and pushing in the pin.
3 Repeat step 2 to adjust the back media guide.
EN | Loading Media 29 |
