HP 8000 s manual Control Panel Features, Message, Description, Recommended Action

Control Panel
Message	Description	Recommended Action
CLEAR	The printer senses a media	See “To clear jams from a
MAILBOX JAM	jam in the multi-bin	finishing device (the optional
	mailbox.	multi-bin mailbox, 3000-sheet
		stapler, 3000-sheet
		stapler/stacker)” on page 48.
CLEAR OUTPUT JAM	The printer senses a media	See “To clear top output bin
UPPER LEFT DOOR	jam in the top output bin.	and upper left door jams” on
		page 47.
CLEAR PAPER JAM	The printer senses a media	Open the printer to locate and
	jam.	clear the jam. See “Removing
		Jammed Media” on page 34.
CLEAR TRANSFER	The printer senses a media	See “To clear registration and
JAM	jam in the transfer drum	transfer area jams” on
	area.	page 44.
CLEAR TRAY 4 JAM	The printer senses a media	See “To clear jams in the
	jam in tray 4.	optional tray 4” on page 39.
CLEAR TRAY X JAM	The printer senses a media	Open the indicated tray and
	jam in one of the optional	remove the jammed media.
	paper trays.	Close the tray and wait for the
		printer to warm up before
		resuming printing.
CLEAR UNEXPECTED	The printer senses a media	See “Remove media from tray
PAPER SIZE JAM	jam in tray 1.	1.” on page 37.
THEN LOAD TRAY 1
<Type> <Size>
CLEARING PAPER	The printer is attempting to	No action is required.
FROM PRINTER	remove unusable media
	(such as media damaged
	in a media jam).
CLOSE	The printer senses that	Close the door indicated in the
<Location> DOOR	one of the printer doors is	message. After all printer
	not closed properly.	doors are closed, the printer
	<Location> is one of the	control panel might display the
	printer doors.	message WARMING UP.

EN Control Panel Features 10