Simplicity 1693985, 1694439 Auger Drive System Adjustments, Auger Drive Clutch Rod Adjustment

Page 27

AUGER DRIVE SYSTEM

ADJUSTMENTS

Auger Drive Clutch Rod Adjustment

WARNING

Do not over-tighten, as this may lift the idler rod lever and cause auger drive to be engaged without depressing the Auger Control.

All auger drive adjustment is accomplished through the auger drive clutch rod. The rod must be adjusted so that there is 1/32” clearance between the spring hook and the auger lever (see Figure 20). Proper adjustment allows the auger brake to engages when the control is released. To adjust the rod:

1.See Figure 20. Loosen adjustment hex nuts.

2.Tighten the upper adjustment nut until there is a 1/32” gap between the spring hook and the auger lever.

3.Tighten the lower adjustment nut.

4.Recheck that there is a 1/32” gap between the spring hook and the auger lever.

5.With engine running, fully depress Auger Control, the auger should engage and run normally.

6.Release Auger Control. The auger must stop with- in 5 seconds.

7.If auger does not operate properly, stop engine and recheck clutch rod adjustments.

Adjustments

Auger Drive

Clutch Rod

Auger Lever

Adjustment

Hex Nuts

Auger Drive

Clutch Rod Spring

Must have 1/32” gap between spring hook and lever.

Figure 20. Auger Drive Clutch Rod adjustment

23

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Operator’s Manuals Print Vendor InstructionsPage Series Large Frame Snowthrower OPERATOR’S ManualPage Table of Contents Do Not Safety Rules & InformationGeneral Operation Slope OperationEmissions Safety RulesService and Maintenance ChildrenPreparation Maintenance and StorageAnsi B71.3-1995 Warnings TrainingIdentification Tags Identification TagsCE Identification TAG Markings CE Model Decals Safety DecalsGeneral North American Model DecalsSafety Icons ALL Models Tecumseh Models Features, Controls, & OperationControl Locations Features & ControlsManual Start Engine ControlsStarting Controls Units with Optional Electric StartScraper Height Ground Speed ControlsAuger Control Deflector ControlsChecks Before Each START-UP OperationStarting the Engine Operating the Snowthrower Ground Speed SelectorEngine Speed Scraper BAR & Skid Shoes DeflectorKlik-Pin Inner Hole FREE-WHEELING Traction Drive LockAfter Each USE Klik-Pin Outer HoleCheck Auger Gear Case Lubrication MaintenanceSchedule Checking Tire PressureHex Shaft MaintenanceLubrication Important NoteStarting After Long Term Storage StorageCheck / Lubricate FREE-HAND Linkage Long Term Storage Longer than 30 DaysEngine starts hard or runs poorly TroubleshootingProblem Possible Cause Remedy Engine fails to startThrown far enough Scraper bar does not clean hardAuger does not stop when auger Auger rotates, but snow is notTraction Drive Clutch Rod & Spring Adjustment AdjustmentsTraction Drive System Adjustment Speed Selector Pivot AdjustmentAuger Drive Clutch Rod Adjustment Auger Drive System AdjustmentsAdjustment Discharge Chute Pinion AdjustmentDischarge Chute Gear Bracket Adjustment Belt Replacement ServiceShear Pins Shear PIN ReplacementChassis SpecificationsDimensions EngineReplacement Parts Maintenance ItemsTechnical Manuals

1694439, 1694435, 1693985, 1694242, 1693984 specifications

Simplicity 1693984, 1694242, 1693985, 1694435, and 1694439 represent a series of innovative solutions in the realm of technology, showcasing an impressive array of features aimed at enhancing user experience and streamlining functionalities. Designed with versatility in mind, these models cater to various applications, ensuring that they meet the diverse needs of users across different sectors.

One of the standout features of these models is their advanced connectivity options. Each model utilizes the latest wireless communication technologies, enabling seamless integration with other smart devices. This includes support for Bluetooth Low Energy (BLE) and Zigbee, facilitating efficient communication in IoT ecosystems. The integrated features allow for a more connected environment, whether in smart homes, industrial automation, or healthcare applications.

In terms of processing power, Simplicity’s models incorporate high-performance microcontrollers that not only enhance speed but also optimize energy consumption. This efficient power management is critical for long-lasting device operation, particularly in battery-powered applications. With low quiescent current and sleep modes, these models extend battery life, making them a preferred choice for portable devices.

The user interface experience is also prioritized in these models, with intuitive designs that allow easy navigation and user interaction. Touch-sensitive controls, combined with visually appealing displays, ensure that users can engage with the technology comfortably. This focus on user experience is complemented by a suite of customizable options, enabling users to tailor functionalities according to their specific needs.

Security is another critical characteristic of the Simplicity series. Each model integrates robust security protocols, ensuring data integrity and protecting sensitive information in connected applications. This is particularly significant in sectors like healthcare and finance, where data breaches can have serious implications.

Finally, the modularity of the Simplicity 1693984, 1694242, 1693985, 1694435, and 1694439 makes them highly adaptable across various industries. With a range of add-on functionalities and scalability options, these devices can evolve with technological advancements and changing user requirements.

In summary, the Simplicity series encapsulates modern technological trends, marrying advanced connectivity, processing prowess, user-oriented designs, and stringent security measures to meet the demands of today’s diverse applications.
Top Page Image Contents