Simplicity 1694242 Safety Rules & Information, General Operation, Slope Operation, Do Not

Page 6

Safety Rules & Information

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.

The triangle in text signifies important cautions or warnings which must be followed.

GENERAL OPERATION

Read, understand, and follow all instructions in the manual and on the unit before starting.

Only allow responsible adults, who are familiar with the instructions, to operate the unit (local regulations can restrict operator age).

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown.

Be sure the area is clear of other people. Stop unit if anyone enters the area.

Always look down and behind before and while trav- elling in reverse.

Be aware of the discharge direction and do not point it at anyone. Do not point the discharge at glass enclosures, automobiles, or windows.

Disengage all clutches (release drive and auger con- trol levers) before starting the engine.

Never leave a running unit unattended. Always disen- gage the auger and traction controls, stop engine, and remove keys.

Stop engine before unclogging chute.

Operate only in daylight or good artificial light.

Do not operate the unit while under the influence of alcohol or drugs.

Watch for traffic when operating near or crossing roadways.

Use extra care when loading or unloading the unit into a trailer or truck.

Keep in mind the operator is responsible for acci- dents occurring to other people or property.

Data indicates that operators, age 60 years and above, are involved in a large percentage of power equipment-related injuries. These operators should evaluate their ability to operate the unit safely enough to protect themselves and others from injury.

All operators should seek and obtain professional and practical instruction.

Always wear substantial footwear and appropriate winter clothing. Wear foot-ware that improves trac- tion on slippery slopes. DO NOT wear long scarves or loose clothing that could become entangled in moving parts.

Before using, always visually check that all hardware is present, in-tact, and secure. Replace worn or damaged parts.

Never operate the machine with defective guards, or without safety protective devises in place.

Stop engine before: refuelling, removing an attach- ment, making adjustments (unless the adjustment can be made from the operator’s position).

Follow the manufacturer’s recommendation for wheel weights or counterweights.

Adjust skid shoe height to clear gravel or crushed rock surfaces.

Do not touch snowthrower parts which may be hot from operation. Allow such parts to cool before attempting to service the unit.

SLOPE OPERATION

WARNING

Never operate on slopes greater than 17.6 percent (10°) which is a rise of 3-1/2 feet (106 cm) vertically in 20 feet (607 cm) horizontally.

When operating on slopes use additional wheel weights or counterweights. See your dealer to determine which weights are available and appropriate for your unit.

Select slow ground speed before driving onto slope. Travel UP and DOWN the slope, never across the face, use caution when changing directions and DO NOT START OR STOP ON SLOPE.

Slopes are a major factor related to loss-of-control and tip- over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not operate on it.

Do

See your authorized dealer for recommendations counterweights to improve stability.

Travel up and down slopes, not across.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Uneven terrain could overturn the unit. Snow can hide obstacles.

Use slow speed. Tires may lose traction on slopes. Choose a low gear so that you will not have to stop or shift while on the slope.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Always keep unit in gear especially when traveling downhill.

Do Not

Do not start or stop on a slope. If tires lose traction, disengage the auger and proceed slowly straight down the slope.

Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

Do not operate near drop-offs, ditches, or embank- ments. The unit could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not operate on wet surfaces. Reduced traction could cause sliding.

Do not shift to neutral and coast down hills.

TP-600-3606-00-LW-UV

2

Image 6
Contents Print Vendor Instructions Operator’s ManualsPage OPERATOR’S Manual Series Large Frame SnowthrowerPage Table of Contents Slope Operation Safety Rules & InformationGeneral Operation Do NotChildren Safety RulesService and Maintenance EmissionsTraining Maintenance and StorageAnsi B71.3-1995 Warnings PreparationIdentification Tags Identification TagsCE Identification TAG Markings North American Model Decals Safety DecalsGeneral CE Model DecalsSafety Icons Features, Controls, & Operation ALL Models Tecumseh ModelsFeatures & Controls Control LocationsUnits with Optional Electric Start Engine ControlsStarting Controls Manual StartDeflector Controls Ground Speed ControlsAuger Control Scraper HeightOperation Checks Before Each START-UPStarting the Engine Operating the Snowthrower Ground Speed SelectorEngine Speed Deflector Scraper BAR & Skid ShoesKlik-Pin Outer Hole FREE-WHEELING Traction Drive LockAfter Each USE Klik-Pin Inner HoleChecking Tire Pressure MaintenanceSchedule Check Auger Gear Case LubricationImportant Note MaintenanceLubrication Hex ShaftLong Term Storage Longer than 30 Days StorageCheck / Lubricate FREE-HAND Linkage Starting After Long Term StorageEngine fails to start TroubleshootingProblem Possible Cause Remedy Engine starts hard or runs poorlyAuger rotates, but snow is not Scraper bar does not clean hardAuger does not stop when auger Thrown far enoughSpeed Selector Pivot Adjustment AdjustmentsTraction Drive System Adjustment Traction Drive Clutch Rod & Spring AdjustmentAuger Drive System Adjustments Auger Drive Clutch Rod AdjustmentAdjustment Discharge Chute Pinion AdjustmentDischarge Chute Gear Bracket Adjustment Service Belt ReplacementShear PIN Replacement Shear PinsEngine SpecificationsDimensions ChassisReplacement Parts Maintenance ItemsTechnical Manuals

1694439, 1694435, 1693985, 1694242, 1693984 specifications

Simplicity 1693984, 1694242, 1693985, 1694435, and 1694439 represent a series of innovative solutions in the realm of technology, showcasing an impressive array of features aimed at enhancing user experience and streamlining functionalities. Designed with versatility in mind, these models cater to various applications, ensuring that they meet the diverse needs of users across different sectors.

One of the standout features of these models is their advanced connectivity options. Each model utilizes the latest wireless communication technologies, enabling seamless integration with other smart devices. This includes support for Bluetooth Low Energy (BLE) and Zigbee, facilitating efficient communication in IoT ecosystems. The integrated features allow for a more connected environment, whether in smart homes, industrial automation, or healthcare applications.

In terms of processing power, Simplicity’s models incorporate high-performance microcontrollers that not only enhance speed but also optimize energy consumption. This efficient power management is critical for long-lasting device operation, particularly in battery-powered applications. With low quiescent current and sleep modes, these models extend battery life, making them a preferred choice for portable devices.

The user interface experience is also prioritized in these models, with intuitive designs that allow easy navigation and user interaction. Touch-sensitive controls, combined with visually appealing displays, ensure that users can engage with the technology comfortably. This focus on user experience is complemented by a suite of customizable options, enabling users to tailor functionalities according to their specific needs.

Security is another critical characteristic of the Simplicity series. Each model integrates robust security protocols, ensuring data integrity and protecting sensitive information in connected applications. This is particularly significant in sectors like healthcare and finance, where data breaches can have serious implications.

Finally, the modularity of the Simplicity 1693984, 1694242, 1693985, 1694435, and 1694439 makes them highly adaptable across various industries. With a range of add-on functionalities and scalability options, these devices can evolve with technological advancements and changing user requirements.

In summary, the Simplicity series encapsulates modern technological trends, marrying advanced connectivity, processing prowess, user-oriented designs, and stringent security measures to meet the demands of today’s diverse applications.