Simplicity 1380, 9560, 9524, 11532, 11570, 1338, 10528, 10560 manual Features & Controls

Page 42

Auger Control

Engages the auger/impeller when depressed. Releasing the control stops the auger/impeller.

Chute Direction Control

Models with Electric Chute Rotator: Depressing the chute rotator switch rotates the chute left or right.

Models with Manual Chute Rotator: Turning the crank rotates the discharge chute to desired position.

r_ Remote/Regular Deflector Control

Regular (Knob) Chute Deflector: Locks chute deflector in desired position. Tilting the chute deflector UP provides a higher stream and greater distance, while tilting the

deflector DOWN provides a lower stream and less dis- tance.

Remote Chute Deflector: Twist the knob to unlock the chute deflector. Pull or push the knob to change the deflector angle. UP provides a higher stream and greater distance, while tilting the deflector DOWN pro- vides a lower stream and less distance.

Easy Turn TM Control

Easy Turn Control: Engaging the Easy Turn TM lever releases the right wheel to allow easy turning in tight areas. Releasing the control automatically engages both drive wheels for full traction.

Traction Lock Pins: The right traction wheel can be completely released using the locking pin (see Figure 7).

This allows the unit to be easily moved with the engine off.

Features & Controls

r_ Fuel

Fuel tank filler cap (see illustration). Note: The fuel shut off valve is located under the fuel tank or on the front of the engine. Close the valve when the snowthrower is not in use. Open the valve before starting.

EPrimer Button

When pressed, the primer button provides initial fuel to help start a cold engine. Normally, pressing the primer button twice will provide enough fuel to start a cold engine.

_PJ!_I Throttle Lever

Controls engine speed. Move toward the hare icon for faster engine speed, move toward the turtle icon for slower engine speed. Move the throttle all the way to STOP to stop the engine. Set throttle to FULL/FAST (hare icon) for operation.

_ Engine Key

The engine key prevents the engine from being started. The key must be fully inserted into the key slot for the unit to start. The key can also used to stop the engine by pulling the key out of the key slot.

WChoke Knob

The choke knob adjusts the air/fuel mixture, and is used to help start a cold engine by providing a richer mixture. Once the engine is warm and running smoothly, the choke knob should be set to the off position to provide a normal air/fuel mix.

r_ Starter

Electric Start (If Equipped): Depressing the starter but- ton activates the electric starter. The electric start button

operates on 120 Volts AC, which is provided by connec-

tion to the extension cord provided with units equipped with this feature. Connect this extension cord ONLY to a

properly grounded 3 prong electrical outlet.

Recoil Starter (All Models): Pulling the recoil handle cranks the engine.

Grip Warmers (Select Models)

The optional grip warmers are powered when the engine is running and have three settings: low, off, and high.

Headlight (Select Models, Not Pictured)

For use in low sunlight - early morning and evening. The headlight is on at all times when the engine is running.

9

Image 42
Contents 10528 Models 1380 9524 Models 115709560 Models 1338 10560 Models 1390Tableof Contents SafetyRules& Information Safety Rules ChildrenPage Decals North American Model DecalsCE Model Decals Safety icons Safety IconsNorth American CE Models Identification NumbersCE Identification TAG Markings CE Models OnlyControl Locations Speed SelectorTraction Control / Free Hand TM Lock Remote/Regular Deflector Control Auger ControlChute Direction Control Easy Turn TM ControlOperation Checks Before Each START-UPStarting the Engine Manual StartOperating the Snowthrower Clearing a Clogged Discharge ChuteDeflector Full Traction Easy Turn TM Freewheeling Traction Drive LockEasy Turn TM Traction Storage After Each USEStorage Auger Gear Case Lubrication Maintenance ScheduleChecking Tire Pressure SizePSIbarRegular Maintenance LubricationRegularMaintenance Lubricating the Auger Shaft AssemblyCheck / Lubricate FREE-HAND Linkage Page Troubleshooting,Adjustments,Service TroubleshootingTroubleshooting ProblemSpeed Selector Adjustment Auger Drive TensionInitial Adjustment Run-In AdjustmentTraction Drive Tension Manual Discharge Chute Control Linkage Adjustment Pinion Gear AdjustmentGear Bracket Adjustment Easy Turn TM Cable Adjustment Shear PIN ReplacementBelt Replacement Belt Cover ScrewsService Tion Drive TensionDimensions EngineChassis Replacement Parts Maintenance ItemsPage Bimplicilq Operators Tableof Contents SafetyRules& Information Safety Rules Page Decals Safety icons IdentificationNumbers Features,Controls,& Operation Features & Controls General Operation Starting the Engine Operating the Snowthrower Deflector Full Traction Storage RegularMaintenance Regular Maintenance RegularMaintenance Page Troubleshooting,Adjustments,Service Troubleshooting Adjustments Traction Drive Tension Manual Discharge Chute Control Linkage Adjustment Adjustments & Service Belt Replacement Service Specifications Parts & Accessories Page Bimplicilq