Simplicity 1280E, 9560M, 9560E, 1390M, 1390E, 1060E, 1170E Engine and Frame Group with Power Boost

Engine and Frame Group with Power Boost

NOTE: Unless noted otherwise, 986732

use the standard hardware torque specification chart.

17

9	Position idler pulley (Ref. 14)		21
	at center of slot in clutch arm
	(Ref. 10).
	14	15	19
			20	Hook one end of spring (Ref. 16)
			18	over clutch rod assembly (Ref. 10)
				between tabs and other end into
				slot in frame.
	13			22
				23
	11		16	24

8

			10	12
						25
	Long hub of idler			35		26
	pulley (Ref. 3) to
		be toward idler
1		arm (Ref. 6).
		4
		3		34		29
			8		1433	27
						28
				7	36	1432
	2		6
		5				31
						37
	Hook one end of spring (Ref. 7)					38
	into top hole of roller arm (Ref. 6)
	and other end into top hole of
	the idler arm assembly in the
	Traction Drive Group.					30
	61	62				40
59	60
58
57						41
		56
		55				39
		54				43
	52	53
						44
						42
Torque to					2944	45
10-14 ft. lbs. or
		3459				Right rear bolt.
14-20 N m
		3550	458			Torque (4) Engine
		3551			47
						Bolts to 17 - 21 ft. lbs.
		Position belt stops 1/16 -			1/8	or 23 - 29 N m
		from belt when auger clutch is engaged.

46

The above parts group applies to the following Mfg. Nos.:

1694590	- 1060E	1694600 - 1280M
1694591	- 1170E	1694601 - 1390M
1694592	- 1280E
1694593	- 1390E
1694598	- 1060M
1694599	- 1170M

© Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 14 TP 400-4155-01-LW-S