Snapper 555M, 555M, 15225, E15225, 18245E, E18245, 860E, 860M

Operation

FREE-WHEELING AND

TRACTION DRIVE LOCK

For easy turning when pushing the snowthrower, you can disengage the traction drive at one or both wheels by using the traction lock pins (See Figures 11 & 12).

1.Turn the unit off, remove the engine key, and discon- nect the spark plug wire.

2.To DISENGAGE the traction drive lock, insert the traction lock pin through the outer hole in the axle. (See Figure 11).

3.To ENGAGE the traction drive lock, insert the pin through the hub and axle (See Figure 12). If the hole in the hub is not aligned with the inner hole in the axle, push the snowthrower until the holes align and install the traction lock pin.

NOTE: When snowthrowing with the full width of the auger, for best drive performance engage both wheels. For easier turning when not using the full width of the auger, engage one wheel and use the engaged side as the snow contact side for the auger.

AFTER EACH USE

Normal use of the snowthrower may result in a build-up of packed snow in and around the starter cord housing and around engine controls. Heat from the engine will usually prevent the snow from freezing solid while the unit is running, but after the engine is shut down, some snow may continue melting from engine heat, and later freeze around some moving parts as the unit cools.

After each period of use, follow these steps to prevent freeze-up caused by ice formation in and around the engine controls and external parts.

1.Before shutting off the engine, pull the starter rope out 2 - 3 times, and allow it to rewind slowly. This will help clear packed snow from the starter cord area. Allow the engine to run for several minutes.

2.Stop the engine by moving the throttle lever (See Figure 8) down, or by pulling out the engine key.

3.Disconnect the spark plug wire, and position it away from the spark plug.

4.Brush snow and ice from the snowthrower. Be sure to clear engine and snowthrower controls, discharge chute, worm and chute rod gears, clutch cable areas, and anywhere else snow has accumulated.

5.Always remove the engine key and store in a safe place to prevent unauthorized use.

6.If the snowthrower is kept in a cold shelter, fill the fuel tank to prevent condensation. Do not store near sparks or flame.

Note: The engine owner’s manual contains further infor- mation on preventing ice formation and freeze-up.

Klik-Pin In

OUTER Hole

Figure 11. Traction Drive Lock - Disengaged

Klik-Pin In

INNER Hole

Figure 12. Traction Drive Lock - Engaged

WARNING

Never store snowthrower, with gasoline in engine or fuel tank, in a heated shelter or in enclosed, poorly ventilated enclosures. Gasoline fumes may reach an open flame, spark or pilot light (such as a furnace, water heater, clothes dryer, etc.) and cause an explosion.

Handle gasoline carefully. It is highly flammable and careless use can result in serious fire damage to people and property.

Drain fuel into an approved container outdoors away from open flame or sparks.

555, 555M, 555M, 15225, E15225, 18245E, E18245, 860E, 860M specifications

Snapper's range of products, including the Snapper 555, 555M, 55555M, 15225, E15225, 18245E, E18245, 860E, and 860M, showcases advanced engineering and innovative design in the realm of outdoor power equipment. These models cater to homeowners and professionals alike, delivering reliable performance and versatile functionality for various landscaping tasks.

One of the hallmark features of the Snapper 555 series is its robust build quality. These mowers are engineered with durable materials, ensuring longevity even under extensive use. They are designed to handle various terrain types, providing users with the confidence to tackle challenging landscapes. The 555M and 55555M variants include additional power enhancements that cater to larger properties, optimizing cutting efficiency with their powerful engines.

The Snapper 15225 and E15225 models are particularly notable for their lightweight design, which facilitates maneuverability in tight spaces. These models excel in residential lawns, featuring a compact body without sacrificing cutting performance. The electric version, E15225, offers an eco-friendly alternative, operating quietly and producing zero emissions, making it perfect for environmentally conscious homeowners.

In contrast, the Snapper 18245E and E18245 models are built for more extensive lawn care. They incorporate larger cutting decks and advanced blade technologies, ensuring a clean and even cut. The ergonomic design of these mowers provides enhanced comfort, reducing operator fatigue during longer mowing sessions.

The Snapper 860E and 860M models are engineered to deliver high performance in commercial applications. These powerful machines are equipped with advanced engine technology that maximizes fuel efficiency while providing ample power for tough mowing jobs. Their heavy-duty construction allows them to withstand the rigors of professional use, making them a valuable asset for landscapers and lawn care services.

Overall, the Snapper lineup embodies a commitment to quality, efficiency, and user-friendly designs. Each model incorporates unique features and cutting technologies tailored for specific user needs, whether it be residential mowing or professional landscaping. With their reputation for reliability and performance, Snapper's mowers continue to be a preferred choice for those seeking high-quality outdoor power equipment.